Installation Guide

ManualsBrandsSymmons ManualsKitchenVella Single-Handle Pull-Out Sprayer Kitchen Faucet in Stainless Steel

Quick Install Guide Vella Kitchen Faucet, S-2610

Step 2

Attach faucet

Step 5

Connect water

supply lines

nished deck

front view

Step 1

Fasten deck plate

(optional)

Step 6

Flush supply lines

and check for leaks

Step 4

Attach counterweight

Step 3

Connect pull-out

spout hose

Pull-out spout

operation

HOT

COLD

Spray

on / off

red stripe

blue stripe

1/8 "

Model Numbers

S-2610.....

Kitchen Faucet

Decorative Finish Codes

append to part numbers when applicable

-STN

Satin Nickel

-STS

Stainless Steel

Chrome (standard)

Tools & Materials

 Need Help?

Symmons customer service:

(800) 796-6667, (781) 848-2250

Email: customerservice@symmons.com

Monday - Friday 8:00 am - 7:30 pm EST

 www.symmons.com/service

Technical help•

Product information•

Warranty policy•

Kitchen Faucet S-2610

Installation and Service Instructions

Vella

™

Summary of content (4 pages)

PAGE 1
Vella™ Kitchen Faucet S-2610 Installation and Service Instructions Model Numbers Need Help? Tools & Materials S-2610..... Kitchen Faucet Symmons customer service: (800) 796-6667, (781) 848-2250 Email: customerservice@symmons.com Monday - Friday 8:00 am - 7:30 pm EST Decorative Finish Codes www.symmons.
PAGE 2
Installation Instructions Caution: If replacing an older faucet ensure water supply is turned OFF before removing and then turn faucet handles ON Step 3 Connect pull-out spout hose to relieve water pressure. Step 1 Attach deck plate (optional) Installing deck plate is optional. Plate is typically used when replacing a faucet to cover existing holes.
PAGE 3
Step 5 Care of faucet ﬁnish Connect supply lines Clean finish area by using mild soap and water or non-abrasive cleaner and then rinse immediately. A non-abrasive wax may be used to preserve finish area.
PAGE 4
Dimensions Vella Kitchen Faucet, S-2610 8" (203 mm) 4" (102 mm) deck plate 1/4" (6 mm) 10" (255 mm) 12-1/8" (308 mm) Finished deck thickness 1-5/8" max. (41 mm) 2-3/8" (62 mm) 8-1/4" (209 mm) 10-1/8" (258 mm) *11-7/8" *8" (302 mm) (203 mm) *9-7/8" *10-3/4" (251 mm) (273 mm) 11" (280 mm) deck plate 10-1/8" (257 mm) deck plate 2-5/8" (67 mm) 3/4" dia. (19 mm) deck plate hole size 7/8" (22 mm) min. 1-1/8" (29 mm) max. 1-1/8" dia. (29 mm) center spout hole size 1-1/4" (32 mm) min.