Installation Guide

ManualsBrandsSymmons ManualsKitchen ApplianceFiano Single-Handle Pull-Out Sprayer Kitchen Faucet in Satin Nickel

Spray

on / off

Step 6

Flush supply lines

and check for leaks

ﬁnished deck

front view

Step 2

Attach faucet assembly

Step 5

Connect water supply lines

Step 4

Attach hose counterweight

Step 3

Connect pull-out spout hose

(optional)

HOT

COLD

Step 1

Place deck plate in position

typically used to cover holes

Quick Install Guide Fiano Kitchen Faucet, S-2630

2.5 mm

For California Residents WARNING: This product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm.

 Need Help?

Contact Symmons customer service at

(800) 796-6667, (781) 848-2250

Email: customerservice@symmons.com

Monday - Friday 8:00 am - 7:30 pm EST

 Please check Symmons website

for technical help, the latest product

information and warranty policy.

www.symmons.com/service

Tools & Materials

Kitchen Faucet S-2630

Installation and Service Instructions

Fiano

™

Model Numbers

S-2630

Kitchen Faucet

Alternate Finish Code

append to part numbers when applicable

-STN

Satin Nickel finish

-STS

Stainless Steel finish

Chrome (standard)

Summary of content (4 pages)

PAGE 1
Fiano™ Kitchen Faucet S-2630 Installation and Service Instructions Model Numbers S-2630 Tools & Materials Kitchen Faucet Need Help? Contact Symmons customer service at (800) 796-6667, (781) 848-2250 Email: customerservice@symmons.com Monday - Friday 8:00 am - 7:30 pm EST Alternate Finish Code append to part numbers when applicable -STN Satin Nickel finish -STS Stainless Steel finish -- Chrome (standard)   2.
PAGE 2
Installation Instructions Caution: If replacing an older faucet ensure water supply is turned OFF before removing and then turn faucet handles ON to relieve water pressure. Step 1 Step 3 Connect pull-out spout hose Place and align deck plate (optional) Typically used to cover existing holes when replacing faucet. Install as required.
PAGE 3
Step 5 Care of faucet finish Connect supply lines Clean finish area by using mild soap and water or non-abrasive cleaner and then rinse immediately. A non-abrasive wax may be used to preserve finish area. Valve cartridge replacement Remove handle, collar and cartridge 1 2 blue stripe (cold) red stripe (hot) 2.5 mm HOT optional 3/8" to 1/2" adapters included Step 6 COLD Replace cartridge Flush supply lines and check for leaks 1 2 Replace collar and handle 2.
PAGE 4
Dimensions Fiano Kitchen Faucet with pull-out spout, S-2630 9-11/16" 245 mm Finished deck thickness 3" (77 mm) max. 2-1/3" (58 mm) max. with flange installed Deck plate (optional) 14-5/8" 372 mm 12-1/8" 309 mm 5-3/4" (147 mm) 2-1/2"(63 mm) 10" (254 mm) 2-1/4" (57 mm) dia. Hole size 1-3/8" (35 mm) min. 1-1/2" (38 mm) max. 1-3/8" (35 mm) dia. 8" 203mm 1/4" (7 mm) Flange (optional, used to give faucet greater steadiness as required).