Installation Guide

ManualsBrandsSymmons ManualsKitchenDia Single-Handle Pull-Down Sprayer Kitchen Faucet in Polished Chrome

ZV-3253 REV C

Single Handle Pull-Down Kitchen Faucet

Installation Instructions

Models: S-3510-PD-1.5 / SK0920-PD-1.5

IMPORTANT / FOR INSTALLER

WARNING:

As the installer of this faucet, you must ﬁrst carefully read and understand the material covered in

this manual before installation. Leave this manual for the owner’s or user’s reference.

Water lines must be thoroughly ﬂushed before and after installing the faucet to prevent foreign

matter i.e. copper chips, sand, stones, etc. from clogging and possibly damaging the sealing surfaces

of the cartridge.

COMPLIANCE

ASME A112.18.1/CSA B125.1

NSF/ANSI 61.9, NSF/ANSI 372

LIFTIME LIMITED WARRANTY

All warranty claims MUST be pre-approved by Symmons.

All parts and ﬁnishes of the Symmons products are

warranted to the original consumer purchaser to be free

from manufacturing defects in material and workmanship

for 5 years Non-Residential or Commercial Applications.

Symmons warrants to the original consumer purchaser/

end-user that any Symmons product will be free of

defects in material and workmanship during normal

domestic use for the life of your home.

Symmons recommends using a professional plumber

for all installation and repair. During the warranty

period, Symmons at its sole option, will provide

replacement part(s) or product (or, if no longer available,

a comparable product) to replace those which have

proven defective in materials or workmanship under

normal installation, use and service, FREE OF CHARGE

for the time period of 5 years from the date of purchase.

(BATTERIES NOT INCLUDED)

This warranty is extensive in that it covers replacement of

all defective parts and even ﬁnish, but these are the only

two things that are covered. Damage due to installation

error, product abuse, product misuse, or use of cleaners

containing abrasives, alcohols, or other organic solvents,

whether performed by a contractor, Service Company

or yourself are excluded from this warranty. Symmons

will not be responsible for labor charges and/or damage

incurred in installation or repair or replacement, nor for

any indirect, incidental or consequential damages, losses,

injury or costs of any nature relating to the bathing

products. Except provided by law, this warranty is in

lieu of and excluded all other warranties, conditions and

guarantees, whether expressed or otherwise, including

without restriction those of merchantability or of ﬁtness

for use.

Some states do not allow the exclusion or limitation

of incidental or consequential damages, so the above

limitation of exclusion may not apply to you. This

warranty gives you speciﬁc legal rights, and you also may

have other rights which vary from state to state. This

warranty is not transferable. This warranty does not cover

damage or defects relating to misuse, abuse, negligence,

normal wear and tear, accident, acts of God, repairs or

alterations not authorized in writing by Symmons, or

improper installation, storage or handling.

The above mentioned warranty information includes each

product that falls under the following: Symmons Bathing

Products Warranty- Non-Residential or Commercial

Applications; Symmons Non-Electronic Lifetime

Faucet and Finish Limited Warranty Non-Residential or

Commercial Applications; Symmons Electronic Faucet

Limited Warranty - Non-Residential, Commercial and

Residential Applications; Symmons Bathing Products

Warranty- Residential Application Symmons Non-

Electronic Lifetime Faucet and Finish Limited Warranty

Residential Application

If you have any questions regarding technical support,

installation or concerns regarding our warranty plan,

please email us at GetHelp@symmons.com or call us at:

1-800-796-6667.

RECOMMENDED TOOLS

Adjustable Wrench 2.5mm Hex Key

Silicone

Phillips Head ScrewdriverMeasuring Tape Safety Glasses

Soft Jaw Pliers

Dia

Summary of content (8 pages)

PAGE 1
Dia ® Single Handle Pull-Down Kitchen Faucet Installation Instructions Models: S-3510-PD-1.5 / SK0920-PD-1.5 COMPLIANCE ASME A112.18.1/CSA B125.1 NSF/ANSI 61.9, NSF/ANSI 372 IMPORTANT / FOR INSTALLER WARNING: As the installer of this faucet, you must first carefully read and understand the material covered in this manual before installation. Leave this manual for the owner’s or user’s reference. Water lines must be thoroughly flushed before and after installing the faucet to prevent foreign matter i.e.
PAGE 2
DIMENSIONS AND MEASUREMENTS (2x) 4" (102mm) 3-5/8" (92mm) To Backsplash Min. 4" (102mm) 2-3/4" (70mm) 16" (406mm) 16-5/16" (414mm) 4-3/8" (111mm) 8-3/8" (213mm) 8-5/64" (205mm) Ø 2-1/8" (54mm) 9-1/16" (230mm) Deck Thickness Reference Max. 2-1/2" (64mm) Hole Size Min. Ø 1-3/8" (35mm) Max. Ø 1-1/2" (38mm) For Optional Deck Plate (2x) Hole Size Min. Ø 1" (25mm) Max. Ø 1-1/4" (32mm) Note: Dimensions subject to change without notice.
PAGE 3
FAUCET INSTALLATION 1. Mount Faucet 1. Install faucet (A) and faucet flange (B) to deck surface. A B Optional Deck Plate: 1. Assemble deck plate (C), gasket (D) and deck plate shanks (E). Place deck plate assembly onto three hole deck surface. 2. Once deck plate is centered, hand tighten mounting nuts (F) to secure. 3. Install faucet (A) and faucet flange (B) to deck plate surface. A B C 3 1 E D 1 2 F 2 OPTIONAL DECK PLATE 2. Secure Faucet Mounting Hardware 1. A 2. 3.
PAGE 4
FAUCET INSTALLATION 3. Connect Pull-Down Hose 1. A ADAPTER RING 1 Attach quick disconnect adapter (B) to the pull-down hose adapter (A). Arrows on adapter ring must be aligned with quick disconnect release tabs for full engagement. Note: Press both quick disconnect release tabs to easily disconnect adapters. QUICK DISONNECT RELEASE TABS B 2. 3. C Orient guide (D) so arrow is facing upward. Slide bottom of guide onto pull-down hose before attaching top of guide.
PAGE 5
FAUCET INSTALLATION 5. Flush Supply Lines 1. Remove wand (B) from pull-down hose fitting (A). With faucet handle in the off position, turn on supply outlets. 2. Turn handle (C) slowly toward the hot position, then the cold position. Check for leaks, debris and foreign matter. 3. After faucet supply lines have been flushed, install wand to pull-down hose fitting.
PAGE 6
SERVICE & MAINTENANCE 1. Remove Cartridge 1. A 2. B Remove lever (A) from handle hub (C) with soft jaw pliers as to avoid damaging finish on lever handle. Use 2.5mm hex key to remove set screw (B) from handle hub. Remove handle hub (C) from faucet. IMPORTANT: Soft jaw pliers must be used on lever handle to avoid damaging decorative finish. 1 C 2 3. 4. 5. Remove decorative collar (D). Remove compression nut (E). Remove cartridge (F) from faucet body.
PAGE 7
TROUBLESHOOTING CHART PROBLEM CAUSE SOLUTION Faucet no longer maintains accurate temperature. Foreign matter such as copper chips, sand, stones, etc. clogging the cartridge ports and/or damaging the sealing surfaces of the cartridge. Remove cartridge and inspect for debris. Replace cartridge if necessary. Flow is irregular. Accumulation of sediment in cartridge. Remove cartridge and inspect for debris. Replace cartridge if necessary. Same as above. Accumulation of sediment in spray wand.
PAGE 8
NOTES WARNING: This product can expose you to chemicals including lead, which is known to the state of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.P65Warnings.ca.gov. Symmons Industries, Inc. Phone: (800) 796-6667 symmons.com ■ ■ ■ 31 Brooks Drive Braintree, MA 02184 gethelp@symmons.com Copyright © 2019 Symmons Industries, Inc.