Installation Guide

4
ZV-3253 REV C
FAUCET INSTALLATION
3. Connect Pull-Down Hose
1. Attach quick disconnect adapter (B)
to the pull-down hose adapter (A).
Arrows on adapter ring must be aligned
with quick disconnect release tabs for full
engagement.
Note: Press both quick disconnect release
tabs to easily disconnect adapters.
2. Orient guide (D) so arrow is facing upward.
Slide bottom of guide onto pull-down hose
before attaching top of guide.
3. Attach counterweight (C) to pull-down
hose. Slide counterweight over top of
guide. Push counterweight down so it
holds guide.
4. Connect Water Supply Lines
1. Connect hot supply hose (on left side) and
cold supply hose (on right side) to supply
outlets.
Notes: DO NOT use plumber putty or
plumber tape on fittings with face
seal washers or o-ring seals.
DO NOT OVERTIGHTEN fittings
with face seal washers or o-ring
seals.
1
A
B
QUICK
DISONNECT
RELEASE TABS
ADAPTER
RING
C
D
3
2
ARROW ON
GUIDE MUST
FACE UPWARD
COLD
SUPPLY
HOT
SUPPLY