Specification

Warranty
■ Limited Lifetime - to the original end purchaser in
consumer installations
■ 5 years - for commercial installations
Location:
Feature Highlights
■ Symmons Tub-Shower System with lever handle
■ Symmons Temptrol
®
pressure-balancing mixing valve with
adjustable stop screw to limit handle turn
■ Screwless escutcheon
■ Secondary integral diverter/volume control handle
■ Showerhead #362SH, single mode, 3 inch diameter
■ Showerhead arm and ange
■ Standard ow rate is 2.5 gpm (9.5 L/min)
Optional lower ow rate restrictor available
■ Tub spout, #067
■ Polished chrome nish (standard)
Model Numbers

S-3602
Tub-Shower System with Symmons Temptrol
®
mixing valve p/n S-4002-BODY

S-3602-TRM
Trim only, mixing valve ordered separately

S-4002-BODY
Symmons Temptrol
®
mixing valve without trim

S-4002-X-BODY
Symmons Temptrol
®
mixing valve without trim.
Valve includes integral service stops to allow water
shut-o for service
Finish Options / Modifications
Append appropriate -sux to model number

-STN
Satin Nickel
-
Polished Chrome (standard nish)
Options / Modifications
Append appropriate -sux to model number

-IPS
1/2 inch female IPS connections on
Symmons Temptrol
®
mixing valve
(not available with -X integral service stops)

-X
Integral service stops included with Temptrol
mixing valve to allow water shut-o for
service, p/n S-4002-X-BODY (option only
applies when ordering model S-3602)

-CHKS
Check Stops: Temptrol
®
mixing valve
includes integral check stops
(Requires integral service stops, sux -X .
Used in installations where a positive shut-o
device is used downstream of mixing valve.)

-REV
Reverse core: Temptrol® mixing valve
with reverse core. (Requires integral service
stops, sux -X . Used in back-to-back system
installations. HOT on the right, COLD on the le)

-LW
Wide lever handle (chrome nish only)

-L/HD
Showerhead not included
(includes showerhead arm and ange only)

-2.0
2.0 gpm (7.6 L/min) ow rate restrictor

-1.5
1.5 gpm (5.7 L/min) ow rate restrictor

-SS
Slip-on type tub spout
Standards / Certifications
ASME A112.18.1-2005 / CSA B125.1-05
Americans with Disabilities Act (ADA) compliant
Specification Submittal
Tub-Shower System S-3602
Duro
™
Print
Email
Reset Form