Installation Guide

ManualsBrandsSymmons ManualsPlumbing ProductCanterbury 1-Handle with Integrated Diverter Tub and Shower Faucet Trim Kit in Chrome (Valve Not Included)

Symmons Industries, Inc. ■ 31 Brooks Drive ■ Braintree, MA 02184 ■ (800)796-6667 ■ Fax: (800)961-9621

■

www.symmons.com

■

gethelp@symmons.com

■

ZV-3075 REV 0 06/16/2014

S-4504-TRM

Canterbury

™

Tub/Hand Shower Trim

Operation & Maintenance Manual

Model Number Speciﬁcations

S-4504-TRM Tub/Hand Shower Trim

Tub/hand shower trim with lever handle and secondary

integral diverter handle includes wall connection, cradle

for hand shower mounting, non-diverter tub spout (069),

in-line vacuum breaker, exible metal hose and 3 mode

hand shower (442W) with 2.5 gpm (9.5 L/min) ow

restrictor. Components made from metal and plastic

materials plated in standard polished chrome nish.

Modiﬁcations Warranty

-1.5 1.5 gpm (5.7 L/min) ﬂow restrictor

-2.0 2.0 gpm (7.6 L/min) ﬂow restrictor

-442HSB 30" slide bar in place of wall cradle on

hand shower units

-STN Satin nickel ﬁnish

Limited Lifetime - to the original end purchaser in

consumer installations.

5 Years - for commercial installations.

Refer to www.symmons.com/warranty for complete

warranty information.

Note: Append appropriate -sufx to model number.

Summary of content (5 pages)

PAGE 1
S-4504-TRM Canterbury™ Tub/Hand Shower Trim Operation & Maintenance Manual Model Number S-4504-TRM Specifications Tub/Hand Shower Trim Modifications Warranty -1.5 1.5 gpm (5.7 L/min) flow restrictor -2.0 2.0 gpm (7.
PAGE 2
Dimensions Measurements B A C D E I J H G 2 1/8", 54 mm B Male 1/2" NPT thread must be recessed 1/4" from finished wall C 6", 152 mm right or left D 3 1/2", 89 mm E 7 1/2", 191 mm F Ø 2 5/8", 67 mm G 32", 813 mm H 12", 305 mm I 3", 76 mm J 3", 76 mm K 1/2", 13 mm L 1/2" NPT M (Rough-in) 2 3/8" ± 1/2", 60 mm ± 13 mm N 7 1/4", 184 mm M K L F Floor A N Notes: 1) All dimensions measured from nominal rough-in (see M as reference).
PAGE 3
Parts Breakdown Replacement Parts D C B E A N G L K M Part Number A Q Vacuum Breaker and Hose EF-104 B Wall Elbow EF-105 C D E F G H I J K L M Wall Cradle Cradle Mounting Screws Cradle Mounting Plate Plug Button Star Washer Handle Set Screw Lock Nut Dome Cover Mounting Screws Shower Escutcheon N Hand Shower 442W O Diverter Handle T-30C P Tub Spout 069 Required for Installation O Adjustable wrench P Phillips head screwdriver Q Allen wrench, 3/16" Teflon Tape 3 EF-106 T-226 T-1
PAGE 4
Installation Note: For valve body installation, please see valve body installation guide. 4) Install handle (H) to valve and secure with screw (I) and star washer (G). Attach plug button (F) to handle. 7) Place cradle mounting plate (E) in position, mark and drill 1/8" pilot holes into stud. E 1 1) Install secondary integral diverter (O) into shower escutcheon (M). 2 H 1 G I Option: Place cradle mounting plate (E) in position, mark and drill 3/16" holes into wall. Install anchors.
PAGE 5
Installation Temperature Control Diverter Control 9) A ttach large end of hand shower hose (Q) to hand shower head (N). Attach small end of hand shower hose (Q) and gasket to in-line vacuum breaker (A). Connect in-line vacuum breaker to wall elbow (B). Turn clockwise to tighten. 1) Turn shower handle counterclockwise approximately 1/4 turn to put valve in cold position. 1) Turn diverter left for tub spout operation.