Installation Guide

5
1) Turn shower handle counterclock-
wise approximately 1/4 turn to put
valve in cold position.
Operation (Temperature Control)
2) Turn shower handle counterclock-
wise approximately 1/2 turn to put
valve in warm position.
3) Turn shower handle counterclock-
wise approximately 3/4 turn to put
valve in hot position.
Installation
9) Remove cover of hand shower cradle (I) . Install cradle
and mounting plate (J) . Secure with three screws (K) .
Replace cover on hand shower cradle.
4
3
2
1
I
K
J
10) Attach hand shower (H) to hose (O). Attach hose (O) to
vacuum breaker (N). Connect vacuum breaker (N) to
wall ell (L). Turn clockwise to tighten.
2
O
1
L
N
3
3
H
2
4
O
Operation (Diverter Control)
1) Turn diverter handle left for tub spout operation. 2) Turn diverter handle right for showerhead operation.