Installation Guide

ManualsBrandsSymmons ManualsKitchenIdentity Single-Handle Pull-Down Sprayer Kitchen Faucet with Deck Plate in Stainless Steel

Identity

Model Numbers Feature Highlights

S-6710-PD

Single Handle Pull-Down Kitchen Faucet

Operation & Maintenance Manual

☐

S-6710-PD Single Handle Pull-Down Kitchen

Faucet

Dimensions

Finish Options/Modiﬁcations

Limited Lifetime - to the original end purchaser in

consumer/residential installations.

5 Years - for industrial/commercial installations.

Refer to www.symmons.com/warranty for complete

warranty information.

Warranty

Note: Append appropriate -sufx to model number.

☐

-1.5 1.5 gpm (5.7 L/min) ﬂow restrictor

☐

-DP 8" deck plate

☐

-STS Stainless Steel ﬁnish

• Single hole mount conguration

• 3 hole mount conguration with optional 8" deck plate

• Two mode wand (spray to stream touch control & standard)

• 360 degree spout rotation

• Quarter turn ceramic cartridge

• 25 inch braided hose water supply connections

• Standard 2.2 gpm (8.3 L/min) ow rate

• Components shall be metal and nonmetallic

construction, plated in standard polished chrome nish

Compliance (pending)

-ASME A112.18.1/CSA B125.1

-NSF/ANSI 61.9; NSF/ANSI 372

Measurements

A 4-1/4", 108 mm

B Ø 1-7/8", 48 mm

C 1-3/16", 30 mm

D 4-7/16", 113 mm

E Ø 1-7/8", 48 mm

F 5-23/32", 145 mm

Deck Thickness Ref.

Max. 1-3/4", 45 mm

Hole Size

Min. Ø 1-3/8", 35 mm

Max. Ø 1-1/2", 38 mm

Deck Thickness Ref.

Max. 1-1/2", 38 mm

J 15-7/16", 392 mm

K 7-7/16", 189 mm

L 90 degrees

M 15 degrees

N 8-11/16", 221 mm

O 25", 635 mm

(2x) Hole Size

Min. Ø 7-16", 11 mm

OPTIONAL 8" DECK PLATEOPTIONAL 8" DECK PLATE

(2X) 9/16-24 UNEF(2X) 9/16-24 UNEF

Note: Dimensions subject to

change without notice.

Summary of content (6 pages)

PAGE 1
Identity TM S-6710-PD Single Handle Pull-Down Kitchen Faucet Operation & Maintenance Manual Model Numbers Feature Highlights ☐ S-6710-PD • • • • • • • • Single Handle Pull-Down Kitchen Faucet Finish Options/Modifications ☐ -1.5 ☐ -DP ☐ -STS 1.5 gpm (5.
PAGE 2
Parts Breakdown INSTALLATION TIP: FOAM WASHER (A) WILL COME ATTACHED TO TOP OF DECK PLATE (B). Item A B C D 8” DECK PLATE FOR 3 HOLE INSTALLATIONS F E G H I J K N P HOT SUPPLY COLD SUPPLY J K H I O Q R S T Foam Washer 8" Deck Plate Mounting Gasket (2x) Studs (2x) Mounting Nuts Pull-Down Hose Spray Wand (1.5) Spray Wand (2.
PAGE 3
Installation Water lines MUST be thoroughly flushed BEFORE and AFTER installing the faucet to prevent foreign matter i.e. copper chips, sand, stones, etc. from clogging and possibly damaging the sealing surfaces of the cartridge. G Q G R G M INSTALLATION TIP: O-RING (P) WILL COME ATTACHED TO DECK FLANGE (M) P 1) Press deck flange (M) against faucet body (G). PRESS TAB TO DISCONNECT S 2) Install faucet body (G), supply hoses and pull-down hose to deck surface.
PAGE 4
Installation (for 8" deck plate) B B DO NOT INSTALL DECK FLANGE (M) WHEN USING 8” DECK PLATE G D 2 1 E 1 D 1 Q R C 1 M T S D 1) Thread studs (D) into deck plate (B). 2) Install deck plate (B) and gasket (C) to deck surface. Thread mounting nuts (E) to studs (D) to secure deck plate (B) under deck. 3) Insert faucet body (G) and faucet hoses through deck plate (B). Follow step 3 instructions (page 1) to secure faucet to deck.
PAGE 5
Cartridge Temperature Limit Stop Instructions FOR NEW INSTALLATIONS FOR REPLACING KN-4 CARTRIDGE K2 K1 1) Remove limit stop (K2) from cartridge (K1). Turn limit stop counterclockwise to allow full handle turn to the hot position. Turn limit stop clockwise to limit handle turn to the hot position. K2 K1 2) Remove limit stop (K2) from cartridge (K1). Turn limit stop counterclockwise to allow full handle turn to the hot position. Turn limit stop clockwise to limit handle turn to the hot position.
PAGE 6
For California Residents WARNING: This product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. Symmons Industries, Inc. ■ 31 Brooks Drive ■ Braintree, MA 02184 ■ Phone: (800) 796-6667 ■ Fax: (800) 961-9621 Copyright © 2017 Symmons Industries, Inc. ■ symmons.com ■ gethelp@symmons.