Specification

Origins
®
Feature Highlights Options/Modifications
S-9601-P, S-9601-P-TRM, S9601PTRMTC
Shower System or Trim
Specification Submittal
Location:
Model Numbers
Compliance
Warranty
Limited Lifetime - to the original end purchaser in
consumer/residential installations.
5 Years - for industrial/commercial installations.
Refer to www.symmons.com/warranty for complete warranty information.
Go to www.symmons.com/register to register your Symmons product.
• Origins Shower System or Trim
• Requires Temptrol
®
Pressure Balancing Shower Valve
(included with S-9601-P)
• Adjustable stop screw to limit handle turn
(included with S-9601-P)
• Integral volume control
• Tri-star handle
• 1 mode showerhead with easy to clean nozzles
• Diverter tub spout not included
• Components shall be metal and nonmetallic construction, plated in
standard Polished Chrome nish
• Available with TA-10 ow control spindle and T-12A cap assembly
for Temptrol valve bodies installed with Test Cap
(order p/n S9601PTRMTC)
☐
S-9601-P
Shower System with integral volume control &
Temptrol Pressure Balancing Shower Valve
☐
S-9601-P-TRM
Shower Trim with integral volume control,
Temptrol Pressure Balancing Shower Valve ordered separately
☐
S9601PTRMTC
Shower Trim with integral volume control,
TA-10 ow control spindle and T-12A cap assembly, must order
Temptrol valve with Test Cap
Note: Append appropriate -sufx to model number.
☐
-1.5 1.5 gpm (5.7 L/min) flow restrictor
☐
-2.0 2.0 gpm (7.6 L/min) flow restrictor
☐
-143 3 mode showerhead
☐
-145 5 mode showerhead
☐
-151 1 mode showerhead
☐
-231 Super showerhead
☐
-295 Institutional showerhead
☐
-B Brass escutcheon (chrome only)
☐
-CHKS Integral check stops - for use in installations
where a positive shut-off device is used
downstream of mixing valve
☐
-D Brass dome cover (chrome only)
☐
-L1 Less showerhead
☐
-LAM Metal finish insert handle
☐
-LP Loop handle
☐
-REB Rebuild trim kit, includes TA-10 and TA-4
☐
-VP Vandal resistant escutcheon screws in place of
standard screws
☐
-X Integral service stops - allows water shut-off at
valve for service
CG
• ASME A112.18.1/CSA B125.1
• Buy American Act (S-9601-P only)