Installation Sheet

ManualsBrandsSymmons ManualsBathroom FaucetsAllura 1.5 GPM Centerset Bathroom Faucet with Pop-Up Drain Assembly

Installation and Service Instructions

Tools & Materials

Allura

Step 7

Connect lift rod

and adjust linkage

Step 9

Flush water supply lines

Step 6

Step 8

Attach drain body to drain trap

Step 4

Attach drain body and tail piece to ange

Step 3

Seat ange into sink drain opening

Step 5

Install stopper and

set eye position

Step 2

Step 1

Attach faucet to sink

Step 1

Non-

Removable Removable

stopper stopper

Visual Install Guide Allura Lavatory Faucet, SLC-4712-1.5

Part No. LN-01302

Attach pivot rod to drain body

Connect water supply lines

(supply hoses are not included)

Lavatory Faucet SLC-4712-1.5

PLUMBERS

PUTTY

 Need Help?

Symmons customer service:

Phone: (800) 796-6667

gethelp@symmons.com

Mon - Fri 7:30 am - 6:00 pm EST



www.symmons.com/service

• Technical help

• Product information

• Warranty policy.

Model Numbers

SLC-4712-1.5

Lavatory faucet with pop-up drain

Alternate Finish Code

append to part numbers when applicable

-STN

Satin Nickel

Chrome (standard)

WARNING: is product can expose you to chemicals including lead, which is known to the state of California to cause cancer,

birth defects, or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

Summary of content (4 pages)

PAGE 1
Allura ® Lavatory Faucet SLC-4712-1.5 Installation and Service Instructions  Tools & Materials Model Numbers Need Help? Symmons customer service: Phone: (800) 796-6667 gethelp@symmons.com Mon - Fri 7:30 am - 6:00 pm EST SLC-4712-1.5 Lavatory faucet with pop-up drain Alternate Finish Code append to part numbers when applicable PLUMBERS PUTTY -STN Satin Nickel -- Chrome (standard)  www.symmons.com/service • Technical help • Product information • Warranty policy.
PAGE 2
Installation Instructions Caution: If replacing an older faucet ensure water supply is turned OFF before removing. Then turn faucet control valves ON to relieve water pressure. Step 1 Step 4 Attach drain body to flange Attach faucet to sink flange beveled washer flange nut back of sink friction washer drain body tail piece Step 2 Connect water supply lines * Note: Attach tail piece to drain body using teflon tape. tape or plumber’s putty.
PAGE 3
Step 7 Valve Valvecartridge cartridgereplacement replacement Connect lift rod and adjust linkage lift rod clevis strap 1 M4 .7 x 6 mm thumb screw location hole 2 spring clip pivot rod drain body drain trap Step 8 Attach drain body to drain trap Step 9 Flush water supply lines 3 RED = Hot BLUE = Cold HOT COLD 4 5 HOT COLD HOT Care of faucet finish COLD Clean finish area by using mild soap and water or non-abrasive cleaners and then rinse immediately.
PAGE 4
Dimensions Allura Lavatory Faucet, SLC-4712-1.5 Part No. LN-01302 9-1/4" 236 mm 3-3/4" 95 mm Deck thickness 1-3/4" ( 45 mm) max 1-15/16" 49 mm 2" ( 51 mm) 4" (102 mm) 1/2"-14 NPSM 6" (152 mm) Hole diameter 1" (25 mm) 4-1/4" 108 mm Parts Assembly Allura Lavatory Faucet, SLC-4712-1.5 Part No. LN-01302 Replacement Parts hot plug button handle collar screw Part Number philips (M4 .