Installation Guide

Symmons Industries, Inc. ■ 31 Brooks Drive ■ Braintree, MA 02184 ■ Phone: [phone] ■ Fax: [phone]
Copyright © 2016 Symmons Industries, Inc. ■ www.symmons.com ■ [e-mail] ■ ZV-3119 REV C ■ 022416
Troubleshooting Chart
Finish is spotting.
Elements in water supply may cause
water staining on nish.
Clean nished trim area with a soft
cloth using mild soap and water or a
non-abrasive cleaner and then quickly
rinse with water.
7) Attach supply lines to 1/2” IPS inlet
connections on faucet body (G).
Using a wrench, nish with one half
turn. DO NOT overtighten.
Maintenance
1) Turn off water. Loosen and
remove handle set screw (D),
handle (B), nut (C) and old
cartridge (E or F).
6
5
3
4
1
2
B
C
D
F
2) Correctly align new cartridge (E
or F) and insert into faucet body
(G). Install and secure nut (C).
1
2
3
C
F
G
3) Replace handle (B) and reinstall set
screw (D). Tighten set screw.
G
8) Attach supply lines to shut-off
valves and hand tighten. Using a
wrench, nish with one-half turn.
DO NOT overtighten.
1
1
2
9) Remove aerator (H) and ush
lines free of debris. Check for
leaks.
2
Installation
H
1
1
3
2
B
D