Installation Guide

ManualsBrandsSymmons ManualsBathDuro Single Hole Single-Handle Bathroom Faucet with Drain Assembly in Brushed Gold

Model Numbers

Duro

Single Handle Lavatory Faucet

Operation & Maintenance Manual

SLS-3612-1.5, SLS-3622-1.5

Single handle lavatory faucet featuring a single hole

mounting conguration. Includes ceramic cartridge,

stainless steel braided hoses with 3/8" compression

ttings, metal drain assembly and standard 1.5 gpm

(5.7 L/min) aerator. Components made from brass and

nonmetallic materials plated in standard

polished chrome nish.

Speciﬁcation

Warranty

Limited Lifetime - to the original end purchaser in

consumer/residential installations.

5 Years - for industrial/commercial installations.

Refer to www.symmons.com/warranty for complete

warranty information.

Compliance

Modiﬁcations

Note: Append appropriate -sufx to model number.

☐

SLS-3612-1.5

Duro Single Handle Lavatory Faucet (6-7/8" height)

☐

SLS-3622-1.5

Duro Single Handle Lavatory Faucet (4-1/2" height)

Dimensions

Note: Dimensions subject to change without notice.

Certied by

IAPMO R&T

Measurements

A 1-11/16", 43 mm

B 6-5/8", 168 mm

Hole Size:

Min. Ø 1-1/4", 32 mm

Max. Ø 1-1/2", 38 mm

D 3/16", 5 mm

E 4-7/16", 113 mm

F 8-9/16", 217 mm

G 6-7/8", 175 mm

H 5-5/16", 135 mm

I 12°

Deck Thickness Ref.

Min. 7/8", 22 mm

Max. 2-3/8", 60 mm

K 24", 610 mm

L 3/8" compression tting

M 1-11/16", 43 mm

N 4-5/16", 110 mm

O 3/16", 5 mm

P 6-1/8", 156 mm

Q 4-1/2", 114 mm

R 2-15/16", 75 mm

S 25", 635 mm

-ASME A112.18.1/CSA B125.1

-NSF/ANSI 61.9, NSF/ANSI 372

-WaterSense 1.5 gpm (5.7 L/min)

☐

-0.5

0.5 gpm (1.9 L/min) aerator

☐

-1.0

1.0 gpm (3.8 L/min) aerator

☐

-2.2

2.2 gpm (8.3 L/min) aerator

Summary of content (4 pages)

PAGE 1
SLS-3612-1.5, SLS-3622-1.5 Duro® Single Handle Lavatory Faucet Operation & Maintenance Manual Model Numbers Specification ☐ SLS-3612-1.5 Single handle lavatory faucet featuring a single hole mounting configuration. Includes ceramic cartridge, stainless steel braided hoses with 3/8" compression fittings, metal drain assembly and standard 1.5 gpm (5.7 L/min) aerator. Components made from brass and nonmetallic materials plated in standard polished chrome finish.
PAGE 2
Parts Breakdown Replacement Parts B A C Item Description Part Number A B C Handle Set Screw Plug Button LN-01416 D Cartridge D J K T Aerator 2.2 Aerator 1.5 Aerator 1.0 Aerator 0.5 Lift Rod Stopper Ball Rod J Lift Rod RL-015 K Stopper RL-016 G, H I Y Mounting Gaskets (2x) Fasteners Supply Hose RL-011 Z Deck Plate RL-104 F Z E F X J K Required for Installation Y L Adjustable wrench G OPTIONAL Allen wrench: 3/16" H I U O P Q Plumber tape W M N LN-01417 (SLS-3612-1.
PAGE 3
Installation 1a) S LS-3612: Insert faucet body (E) through deck surface. 3) Install teflon tape to inlets of shut-off valves. Attach supply lines to shut-off valves and hand tighten. Using a wrench, finish with onehalf turn. DO NOT overtighten. 6) From below, tighten flange nut (O) to secure drain body (Q). DO NOT overtighten. E 1 O Q 1 2 1b) S LS-3622: Insert faucet body (E) through deck plate (Z) and deck surface. 4) Apply plumber putty to underside of flange (L).
PAGE 4
Installation 9) Insert lift rod (J) into back of faucet body (E). From below, attach clevis strap (W) to lift rod (J). Tighten thumb screw to secure. 10) With stopper in closed location, insert pivot rod (T) into clevis strap (W). Secure with spring clip (V). W V J T E 1 13) The handle limit stop can be set to limit handle turn to the hot position. To measure temperature, turn handle to full hot position and lift handle half way open. If water is too hot or cold, loosen set screw and remove handle.