Installation Guide

5
Installation with MAXLINE
™
Thermostatic Mixing Valve
SCOT FAUCET
(SLC-7000)
FIGURE 1
SLS-7000-ML
MAXLINE THERMOSTATIC
MIXING VALVE
(7-210-ASB)
TO COLD
WATER SUPPLY
TO HOT
WATER SUPPLY
WASHER
(WHITE)
SUPPLY NUT
VALVE
OUTLET
FAUCET
WATER BODY
SUPPLY
For applications using MAXLINE thermostatic mixing
valve.
1) Turn off water supplies.
2) Connect thermostatic mixing valve to faucet water
body supply using the supply nut and washer provided
(see Figure 1 for reference).
3) Connect hot water supply and cold water supply to
thermostatic mixing valve.
4) Remove aerator from faucet. Open cold supply, hold-
ing down handle for 10 seconds. Open hot supply and
repeat above procedure. Allow faucet to ush lines to
prevent foreign matter i.e. copper chips, sand, stones,
etc. from clogging and possibly damaging the sealing
surfaces of the faucet cartridge. R eplace aerator.