Installation Sheet

ManualsBrandsSymmons ManualsPlumbingDuro Collection SLS-3612-STN-0.5 6.88" Deck Mounted Single Hole Bathroom Faucet with Lever Handle in Satin Nickel

Duro

Model Numbers Feature Highlights

Warranty

Limited Lifetime - to the original end purchaser in

consumer installations.

5 Years - for commercial installations.

Refer to www.symmons.com/warranty for complete

warranty information.

Single Handle Lavatory Faucet

Operation & Maintenance Manual

SLS-3612-1.5, SLS-3610-1.5

Note: Append appropriate -sufx to model number.

Options/Modiﬁcations



-BBZ Brushed Bronze ﬁnish



-MB Matte Black ﬁnish



-STN Satin Nickel ﬁnish

Compliance



SLS-3612-1.5 Single Handle Lavatory Faucet

with Metal Drain Assembly



SLS-3610-1.5 Single Handle Lavatory Faucet

• Single hole mount

• Quarter turn ceramic control cartridge

• Braided hose connections (3/8" compression)

• 6-7/8" height

• Metal drain assembly (SLS-3612 series only)

• Standard 1.5 gpm (5.7 L/min) aerator

• Shall be made from metal construction, plated

in standard polished chrome nish

Note: Append appropriate -sufx to model number.

Finish Modiﬁcations



-0.5 0.5 gpm (1.9 L/min) aerator



-1.0 1.0 gpm (3.8 L/min) aerator



-DP4 4" deck plate for single hole mount

faucets

- ASME A112.18.1/CSA B125.1

- NSF/ANSI 61.9; NSF/ANSI 372

- WaterSense 1.5 gpm (5.7 L/min) only

Certied by

IAPMO R&T

SLS-3612

SLS-3610

Dimensions

Measurements

A 1-11/16", 43 mm

Hole Size:

Min. Ø 1-1/4", 32 mm

Max. Ø 1-1/2", 38 mm

C 3/16", 5 mm

D 4-7/16", 113 mm

E Min. 2-1/2", 64 mm

F 8-7/16", 214 mm

G 6-7/8", 175 mm

H 5-5/16", 135 mm

I 12°

J 4-7/16", 113 mm

Deck Thickness Ref.

Min. 7/8", 22 mm

Max. 2-1/2", 64 mm

L 24", 610 mm

M (2x) 3/8" compression tting

Note: Dimensions subject to change without notice.

CBB

BACKSPLASHBACKSPLASH

Summary of content (4 pages)

PAGE 1
Duro ® SLS-3612-1.5, SLS-3610-1.5 Single Handle Lavatory Faucet Operation & Maintenance Manual Model Numbers Feature Highlights  SLS-3612-1.5 Single Handle Lavatory Faucet with Metal Drain Assembly  SLS-3610-1.5 Single Handle Lavatory Faucet Options/Modifications  -0.5  -1.0  -DP4 CG 0.5 gpm (1.9 L/min) aerator CG 1.0 gpm (3.
PAGE 2
Parts Breakdown Replacement Parts B Item Description BB A B C AA BB D Handle Set Screw Plug Button Compression Nut Limit Stop Cartridge D BB D Limit Stop Cartridge RL-070 F Aerator 1.5 Aerator 1.0 Aerator 0.5 RL-059-1.5* RL-059-1.0* RL-059-0.
PAGE 3
Installation 1) Insert faucet body (E) through deck surface. Optional: Adjust limit stop washer to limit handle turn to the hot position if desirable. 6) From below, tighten flange nut (O) to secure drain body (Q). DO NOT overtighten. 2 _ E + 1 3 O 4) Apply plumber putty to underside of flange (L). Q Note: Make sure flange is centered in drain opening. 7) Insert stopper (K) into flange (L) and rotate to proper position.
PAGE 4
Installation 8) Insert pivot rod (T) into drain body (Q) against gasket (P) and inner seat (R). Install outer seat (S) against pivot ball and secure assembly by tightening retaining nut (U). P 1 T 9) Insert lift rod (J) into back of faucet body (E). From below, attach clevis strap (W) to lift rod (J). Tighten thumb screw to secure. 10) With stopper in closed location, insert pivot rod (T) into clevis strap (W). Secure with spring clip (V).