Installation Guide

3
Installation
1
3
2
V1
V2
V7
ROD INLET
2) Turn tail piece (V7) and ange (V2)
so rod inlet is facing toward faucet.
Pull assembly down into drain hole.
Secure hardware from below sink.
Install stopper (V1) in the removable
or non-removable position.
1) Seat ange (V2) into sink. Install
gasket (V4), washer (V5) and nut (V6)
onto ange from below sink, but do
not secure nut. Screw on tail piece (V7)
and hand tighten.
2
2
3
1
V2
V3
V5
V6
V7
V4
OPTIONAL
PLUMBER
PUTTY
3) Attach inner washer (V8), pivot
rod (V9) and outer washer (V10) to
tail piece (V7). Hand tighten rod
nut (V11) to secure pivot rod (V9).
1
V7
V8
V9
V11
V10
N
4) Insert valve bodies (N) through sink
holes.
5) Install washer (R) and mounting
nut (S) to valve body (N). Secure
with screws (U).
1
N
R
S
U
6) Insert spout body (D) through sink
hole. Attach rubber washer (L)
and metal washer (M) to threaded
rod on spout body. Secure with
mounting nut (O).
L
1
D
2
M
3
O
7) Connect lift rod (A) to clevis strap (V13)
and secure with thumb screw (V14).
A
V13
1
2
V14