Installation Sheet

ManualsBrandsSymmons ManualsPlumbingCanterbury Collection SLW-4512-STN-1.0 2.88" Deck Mounted Widespread Bathroom Faucet with Lever Handles in Satin Nickel

Non-

Removable Removable

stopper stopper

Quick Install Guide Canterbury Widespread Lavatory Faucet, SLW-4512

Flush water supply lines

Step 10

Step 1

Attach faucet spout

Step 3

Attach faucet handles

Step 2

Attach pivot rod to drain body

Step 7

Connect lift rod, clevis strap,

pivot rod and adjust linkage

Step 8

Install stopper and

set eye position

Step 6

Attach drain body to drain trap

Step 9

Step 4

SConnect water supply lines

Attach control valves to sink

Step 1

Fasten drain body and

tail piece to sink

Step 5

Compliance

- ASME A112.18.1/CSA B125.1

- NSF/ANSI 61.9, NSF/ANSI 372

- WaterSense 1.0 & 1.5 gpm

Certied by

NSF International

Plumbers

Putty

Pipe

Sealant

 Need Help?

Contact Symmons customer service at

P: (800) 796-6667, F: (800) 961-9621

Email: customerservice@symmons.com

Monday - Friday 7:30 am - 6:00 pm EST

 Please check Symmons website

for technical help, the latest product

information and warranty policy.

www.symmons.com/service

Tools & Materials

Installation and Service Instructions

Canterbury

Widespread Lavatory Faucet SLW-4512

Model Numbers

SLW-4512

Lavatory faucet with

pop-up drain

Alternate Finish Code

append to part numbers when applicable

-STN

Satin Nickel

Chrome (standard)

WARNING: This product can expose you to chemicals including lead, which is known to the state of California to cause cancer, birth defects,

or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

Summary of content (4 pages)

PAGE 1
Canterbury® Widespread Lavatory Faucet SLW-4512 Installation and Service Instructions Tools & Materials Model Numbers SLW-4512 Lavatory faucet with pop-up drain Alternate Finish Code append to part numbers when applicable -STN Satin Nickel -- Chrome (standard)  Need Help? Contact Symmons customer service at P: (800) 796-6667, F: (800) 961-9621 Email: customerservice@symmons.com Monday - Friday 7:30 am - 6:00 pm EST Plumbers Putty e Pip nt la Sea  Compliance - ASME A112.18.1/CSA B125.
PAGE 2
Installation Installation Instructions Instructions Caution: If replacing an older faucet ensure water supply is turned OFF before removing. Then open faucet valves to relieve water pressure. Step 1 Attach control valves to sink ■■ Thread flange nut down 2 inches from threaded end of valve body. fastener gasket ■■ Insert valve body from underneath sink through mounting hole. Ensure valve with red striped valve body hose (hot) is on left and blue (cold) is on right.
PAGE 3
Step 6 Install stopper and set eye position Step 10 Flush water supply lines Stopper can be removable stopper or non-removable flange determined by position of eye hole when non inserting pivot rod. removable removable ■■ Insert stopper through flange opening and position eye hole. Thoroughly flush supply lines to prevent foreign remove matter, i.e. copper chips, aerator sand, etc. from damaging the sealing surface inside control valves.
PAGE 4
Dimensions Canterbury Widespread Lavatory Faucet, SLW-4512 4" (102 mm) min 3-1/8" (80 mm) 8" (203 mm) min 16" (406 mm) max 5-15/16" (151 mm) 2-7/8" 2" dia 73 mm 1-7/16" (36 mm) (51 mm) 13/16" dia. (21 mm) Hole size 1-1/8" (29 mm) min 1-1/2" (38 mm) max Deck thickness 1-3/8" (35 mm) max 1" dia. (25 mm) Hole size 1-1/16" (27 mm) min 1-7/16" (37 mm) max Flexible hose 2-3/8" dia (60 mm) ~ 5/8" (16 mm) 1/2-14 NPSM Note: Dimensions subject to change without notice.