Installation Guide

ManualsBrandsSymmons ManualsBar FaucetsDia Single-Handle Bar Faucet in Chrome

SPB-3510-1.5

Dia

™

Single Lever Bar Sink Faucet

Operation & Maintenance Manual

Model Number Speciﬁcations

SPB-3510-1.5 Dia Single Lever Bar Sink

Faucet

Dia single lever bar sink faucet includes ceramic

cartridge, braided hose connections, rigid/swivel spout

and 1.5 gpm (5.7 L/min) ow restrictor.

Modiﬁcations Compliance

-1.0 1.0 gpm (3.8 L/min) ﬂow restrictor outlet

spray

-1.5 1.5 gpm (5.7 L/min) ﬂow restrictor outlet

spray

Delete 2.2 gpm (8.3 L/min) ﬂow restrictor

Sufﬁx 1.5 outlet spray

-DP4 4" deck plate for single hole mount

faucets

-STN Satin nickel ﬁnish

Note: Append appropriate -sufx to model number.

-ASME A112.18.1/CSA B125.1

-NSF/ANSI 61.9, NSF/ANSI 372

For California Residents

WARNING: This product contains chemicals known to the

State of California to cause cancer, birth defects, or other

reproductive harm.

Limited Lifetime - to the original end purchaser in

consumer installations.

5 Years - for commercial installations.

Refer to www.symmons.com/warranty for complete

warranty information.

FEE

Note: Dimensions are subject to change without notice.

Measurements

A 4", 102 mm

B 1-5/8", 41 mm

C 1", 25 mm

D 3-7/8", 98 mm

E 10-13/16", 275 mm

F 11", 279 mm

(Hole Size)

Min. 1-1/4", 32 mm

Max. 1-3/8", 35mm

H 6", 152 mm

I 7", 178 mm

Min. 7/8", 22 mm

Max. 2-3/8", 60 mm

K 3/16", 5 mm

Warranty

Dimensions

Summary of content (3 pages)

PAGE 1
SPB-3510-1.5 Dia™ Single Lever Bar Sink Faucet Operation & Maintenance Manual Model Number Specifications Dia single lever bar sink faucet includes ceramic cartridge, braided hose connections, rigid/swivel spout and 1.5 gpm (5.7 L/min) flow restrictor. SPB-3510-1.5 Dia Single Lever Bar Sink Faucet Modifications Compliance -1.0 1.0 gpm (3.8 L/min) flow restrictor outlet spray -ASME A112.18.1/CSA B125.1 -NSF/ANSI 61.9, NSF/ANSI 372 -1.5 1.5 gpm (5.
PAGE 2
Parts Breakdown Replacement Parts A Item Description Part Number B 1.5 gpm aerator RK-015-1.5 C Cartridge BL-120 J C D B I D RK-013* RL-032* Notes: *1) Append -STN to part number for satin nickel finish. 2) Append -1.0 or delete -1.5 for aerator flow restrictor.
PAGE 3
Installation 1) Insert faucet body (A) through deck plate. A 2) Slide rubber washer (E), metal washer (F), and nut (G) on to threaded studs. Hand tighten nut (G) then tighten screws (H). J 3) Install Teflon tape to inlets of shut-off valves. Attach supply lines to shut-off valves and hand tighten. Using a wrench, finish with one-half turn. DO NOT overtighten. 2 1 1 E 1 F H 3 G 2 Optional: To make swivel spout rigid, secure spout (A) with set screw (J) using a 5/64" allen wrench.