Installation Sheet

ManualsBrandsSymmons ManualsPlumbingAllura Collection SRT-4770 4.87" Deck Mounted Widespread Tub Filler with 2.5 GPM Flow Rate and Lever Handles in Polished Chrome

Quick Install Guide

Allura Roman Tub Faucet, SRT-4770

Step 8

Flush water supply lines

Step 7

Attach water spout

Step 5

Attach handles

Step 4

Attach valve assembly

Step 6

Connect water supply lines

and check for leaks

Step 2

Solder valve assembly together

Step 1

Cut copper tubing to length

nished deck

Step 3

Mount valve assembly

SRT-4770 .............. Chrome finish

SRT-4770-STN ..... Satin Nickel finish

1/8"

1 2 3 4

WARNING: This product can expose you to chemicals including lead, which is known to the state of California to cause cancer, birth defects,

or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

Roman Tub Faucet SRT-4770

Installation and Service Instructions

Allura

Model Numbers

Tools & Materials

 Need Help?

Symmons customer service:

Phone: (800) 796-6667

Email: gethelp@symmons.com

Monday - Friday 7:30 am - 6:00 pm EST

www.symmons.com/service



Compliance

ASME A112.18.1/CSA B125.1

Summary of content (4 pages)

PAGE 1
Allura® Roman Tub Faucet SRT-4770 Installation and Service Instructions Model Numbers Tools & Materials 1/8" Compliance  Need Help? Symmons customer service: Phone: (800) 796-6667 Email: gethelp@symmons.com Monday - Friday 7:30 am - 6:00 pm EST SRT-4770............... Chrome finish SRT-4770-STN...... Satin Nickel finish www.symmons.com/service ASME A112.18.1/CSA B125.
PAGE 2
Installation Instructions Caution: If replacing an older faucet ensure water supply is turned OFF before removing and then turn faucet handles ON to relieve water pressure. Step 1 Step 3 Mount valve assembly to deck Cut copper tubing to length finished deck front view Length = (d) minus 2-1/4 inches (57 mm) divided by 2. center to center distance (d)* red (hot) blue (cold) Step 4 Attach valve assembly 1/2" (12.7 mm) copper tubing 1-7/8" 47 mm Example: If center to center distance (d) is 14 inches.
PAGE 3
Step 6 Step 9 Flush water supply lines Fasten valve assembly to deck D1 = D2 D1 D2 Care of faucet finish Step 7 Solder supply lines to valve inlets Clean finish area by using mild soap and water or non-abrasive cleaner and then rinse immediately. A non-abrasive wax may be used to preserve finish area.
PAGE 4
Dimensions Allura Roman Tub Faucet, SRT-4770 2-7/8" (73 mm) 3" (76 mm) 3-1/8" (80 mm) 4-7/8" 123 mm Finished deck thickness 1-3/8" (35 mm) max *3-3/8" (86 mm) max for TT style faucet 1" dia (25 mm) Hole size 1-1/16" (27 mm) min 1-1/2" (38 mm) max 1-7/8" (47 mm) 8" (203mm) min 18-1/4" (464 mm) max with Symmons supplied copper tubing Connect using 1/2" copper tubing 3-15/16" (101mm) 5-15/16" (151mm) * TT style faucet 8" (205 mm) * Note: Use TT style faucet if deck thickness is 1-3/8" to 3-3/8" (35 mm