T4200.QX33 00.11.28 4:14 PM Page 1 OWNER’S MANUAL 9-INCH COLOR TV/VCR SC309B This Owner’s Manual is made of recycled paper. As an ENERGY STAR ® Partner, our company has determined that this product meets the ENERGY STAR ® guidelines for energy efficiency. ENERGY STAR ® is a U.S. registered mark. INSTRUCCIONES EN ESPAÑOL INCLUIDAS. If you need additional assistance for set-up or operating after reading owner’s manual, please call TOLL FREE : 1-800-242-7158.
T4200.QX33 00.11.28 4:14 PM Page 2 WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. RISK OF ELECTRIC SHOCK DO NOT OPEN THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
T4200.QX33 00.11.28 4:14 PM Page 3 F IGURE A EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECT RICAL CODE ANTE NNA L EAD I N WI RE GROUND CLAMP A NTENNA DI SCHARG E UN I T (NEC SECTION 8 10 -2 0) EL ECT RI C SE RV I CE EQ U I PM EN T G RO UNDI NG CO NDUCT ORS (NEC SECTION 8 10 -2 1) G RO UND CL AM PS NEC - NATI O NAL EL ECTRI CAL CO DE POWER SERVI C E G RO UNDI NG EL EC TR O DE SYST EM (NEC ART 2 50 , PART H) S2 8 9 8 A 13.
T4200.QX33 00.11.28 4:14 PM Page 4 PRECAUTIONS LOCATION For safe operation and satisfactory performance of your TV/VCR, keep the following in mind when selecting a place for its installation: • Shield it from direct sunlight and keep it away from sources of intense heat. • Avoid dusty or humid places. • Avoid places with insufficient ventilation for proper heat dissipation. Do not block the ventilation holes at the top and bottom of the unit.
T4200.QX33 00.11.28 4:14 PM Page 5 TABLE OF CONTENTS C IMPORTANT SAFEGUARDS . . . . . . . . . . . . .2 C PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . .4 LOCATION . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 AVOID THE HAZARDS OF ELECTRICAL SHOCK AND FIRE . . . . . . . . . . . . . . . . . . . . . .4 WARNING . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 C FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 C SUPPLIED ACCESSORIES . . . . . . . . . . . . . . .
T4200.QX33 00.11.28 4:14 PM Page 6 FEATURES • Infrared remote control • Dew Sensor–Indicates that moisture condensation may • Still–“Freeze” the picture at any time, for close viewing • Bilingual on screen menu display selectable in • occur inside the TV/VCR. • English or Spanish Real time counter–This shows the elapsed recording or • playback time in hours, minutes, and seconds. The “–” indication will appear when the tape is rewound further than the tape counter position “0:00:00”.
T4200.QX33 00.11.28 4:14 PM Page 7 OPERATING CONTROLS AND FUNCTIONS NOTE: • We do not recommend the use of universal remote controls. Not all of the functions may be controlled with a universal remote control. If you decide to use a universal remote control with this unit, please be aware that the code number given may not operate this unit. In this case, please call the manufacturer of the universal remote control. - TV/VCR FRONT PANEL - [Fig.1] POWER AUDIO STOP/EJECT REW PLAY F.
T4200.QX33 00.11.28 4:14 PM Page 8 - REAR VIEW - [Fig.3] 27 DC 13.2V AC 120V 28 ANT 26 Fig.3 9 F.FWD button– Press to rapidly advance the tape, 125, first press the “+100” button then or to view the picture rapidly in forward during press “2” and “5”). playback mode. (Forward Search) 16 MENU button– Press to display the main menu on B button– the TV screen.
T4200.QX33 00.11.28 4:14 PM Page 9 PREPARATION FOR USE From Cable System or Satellite Dish Satellite Box or OUT Cable Box IN (Not supplied) Dipole Antenna (Supplied) VHF/UHF Antenna (Not supplied) Flat twin-lead cable VHF Antenna (Not supplied) From Cable System UHF Antenna (Not supplied) or DC 13.2V AC 120V ANT VHF/UHF or Combiner (Not supplied) 75-ohm Coaxial Cable (Not supplied) or ANT. or Flat twin-lead cable Fig.
T4200.QX33 00.11.28 4:14 PM Page 10 CABLE WITH CONVERTER/ DESCRAMBLER BOX OR SATELLITE BOX MOBILE CONNECTION WARNING: The driver should never watch the TV/VCR while operating a motor vehicle. If your cable service supplies you with a converter box or if you use a satellite system, you can use the basic connection shown here. By using this connection you can also record scrambled channels. However, channel selection must be made with the converter box or satellite box.
T4200.QX33 00.11.28 4:14 PM Page 11 SET UP FOR USE You can program the tuner to scan all the channels you receive in your area. NOTE: Channel memory programming is NOT needed when connected to a cable box or satellite box. Just select the TV/VCR channel selector to the output channel of the cable box or satellite box (Ex CH3). Then select the channel to be viewed on the Cable Box or Satellite Box.
T4200.QX33 00.11.28 4:14 PM Page 12 NOTES: • Auto clock setting only needs to be set once. But it can be done again if the clock’s time has become incorrect for some reason. • If the TV/VCR is connected directly to a cable converter box or satellite box, the local PBS station must be selected on the cable box itself, and the TV/VCR must be set to the output channel of the cable converter box or satellite box (usually channel 3 or 4), to be able to set up or correct the clock automatically.
T4200.QX33 5 00.11.28 4:14 PM Page 13 Select the year Press the PLAY/K or STOP/L button until your desired year appears. (Example: 2001) Then, press the F.FWD/B button. 05 / 01 HOUR Make sure ... • Press the POWER button to turn on the TV/VCR. 2001 –– 1 MONTH DAY 05 / 01 HOUR YEAR TUE 2001 MINUTE PM Select the minute Press the PLAY/K or STOP/L button until the desired minute appears. (Example: 40) Select “CHANNEL SET UP” Press the MENU button on the remote control.
T4200.QX33 4 00.11.28 4:14 PM Page 14 DAYLIGHT-SAVING TIME Delete (or add) it from (into) memory Press the F.FWD/B or REW/s button. The channel number changes to light red. The channel is deleted from memory. • To delete another channel, repeat steps [3] and [4]. • If you press the F.FWD/B or REW/s button again, the channel is memorized again. Added channel: Light blue. Deleted channel: Light red. 5 Exit the channel setup mode Press the MENU button on the remote control to returns to TV mode.
T4200.QX33 00.11.28 4:14 PM Page 15 TV OPERATION WATCHING A TV PROGRAM 1 PICTURE CONTROL Turn on the TV/VCR Press the POWER button to turn on the TV/VCR. 2 Select the channel number Press the CHANNEL K or L button to select your desired channel number or press the number buttons on the remote control. Remember: If the TV/VCR is connected to a cable box or satellite box, the TV/VCR must be on CH3 or CH4, then the channel to be viewed must be selected on the cable box or satellite box.
T4200.QX33 00.11.28 4:14 PM Page 16 PLAYBACK This TV/VCR will operate with any cassette that has the mark. For best results, we recommend the use of high-quality tapes. Do not use poor quality or damaged tapes. INSERTING A CASSETTE AUTO REPEAT PLAYBACK Insert the cassette in the direction as shown. Push in gently, but continuously, on the center-back of the cassette until it is drawn into the TV/VCR. The TV/VCR will automatically turn on.
T4200.QX33 00.11.28 4:14 PM Page 17 SEARCH PICTURE SEARCH This feature is very useful in finding or skipping over a particular scene on a tape. In this mode, the sound will be muted. 1)You may view a video tape at a high speed in either a forward or reverse direction by pressing the F.FWD or REW button. (in the SP / LP / SLP modes) 2)Press it again and the TV/VCR will now search in super high speed.
T4200.QX33 00.11.28 4:14 PM Page 18 NOISE CANCEL (in the Still mode) RENTAL PLAYBACK This feature allows you to reposition or reduce the noise lines of a still picture.Press the PAUSE/STILL button so that the noise lines change position on the screen so you can see the picture in its entirety without distracting noise lines. NOTE: This feature can be activated ONLY when viewing a tape recorded in the SLP mode.
T4200.QX33 00.11.28 4:14 PM Page 19 Make sure ... • TV/VCR power must be turned on. • Insert a cassette tape with its erase prevention tab in place. (If necessary, rewind or fast forward the tape to the point at which you want to begin recording.) NOTE: This unit will ONLY record and view the same channel. NORMAL RECORDING OTR (One Touch Recording) You can ONLY watch the same TV program that is being recorded.
T4200.QX33 3 00.11.28 4:14 PM Begin OTR Page 20 Avoid over lap of programs ... There is a chance that a program will not be recorded. when programs overlap; • The program with an earlier start has priority. • Once the earliest program finishes, the overlapping programs will begin recording in sequence. OTR(2 : 30) Press the REC/OTR button on the TV/VCR as many times as needed. The recording length will be determined by the number of times you press the REC/OTR button.
T4200.QX33 00.11.28 4:14 PM Page 21 until the desired date appears. (Example: “7/06” for July 6th). Then, press the F.FWD/B button. For every day recording : To record a TV program at the same time on the same channel every day. (Example: Monday through Sunday) – TIMER PROGRAMMING – CH DATE Press the STOP/L (down) button until “EVRY DAY” appears. Then, press the F.FWD/B button.
T4200.QX33 00.11.28 4:14 PM Page 22 TO CANCEL AN AUTOMATIC TIMER RECORDING 2 • After setting a program; • 1)Press the POWER button. 2)Repeat steps [1] ~ [2] on page 21 and select a program you want to cancel. 3)Press the T-PROG. CLEAR button. 4)Press the MENU button on the remote control to return to TV mode. While recording is in progress; 1)Press POWER button. 2)Press the STOP/EJECT button on the TV/VCR. TO CHECK THE BEGIN/END TIME 1)Press the POWER button so that the REC indicator goes off.
T4200.QX33 3 00.11.28 4:14 PM Page 23 1 Set wake up time Press the PLAY/K or STOP/L button until to point to “TIME”. Press the F.FWD/B or REW/s button until your desired wake up time appears. Each additional push will increase (or decrease) the time by 10 minutes. WAKE UP TIMER ON/OFF TV/TAPE B TIME Select “SLEEP TIMER” Press the WAKE UP/SLEEP button on the remote control until “SLEEP TIMER” appears.
T4200.QX33 00.11.28 4:14 PM Page 24 ON SCREEN DISPLAY To check the Counter, Clock and Channel number on the TV screen, press the DISPLAY button on the remote control. Each time you press the DISPLAY button on the remote control, the TV screen will change as follows: • Counter mode: After 5 seconds, only • the counter remains. To clear it, press the DISPLAY button. Clock mode: After 5 seconds, only the clock and the channel number remain.
T4200.QX33 00.11.28 4:14 PM Page 25 TROUBLESHOOTING GUIDE If you have followed the instructions contained in this manual and have difficulty in operating your TV/VCR, locate the PROBLEM in the left column below. Check the corresponding CORRECTIVE ACTION column to remedy the problem. PROBLEM No picture but the audio is OK in playback. CORRECTIVE ACTION Make sure the AC cord is connected to an AC outlet. • • Make sure the car battery cord is connected to vehicle’s cigarette lighter socket and to DC 13.
T4200.QX33 00.11.28 4:14 PM Page 26 SPECIFICATIONS GENERAL SPECIFICATIONS ELECTRICAL SPECIFICATIONS CRT : 9 inch in-line gun, 90˚ deflection tube NTSC-M Rotary two-head 1/2 inch Video input level : Audio input level : Video S/N ratio : Audio S/N ratio : 33.40mm/sec. 16.67mm/sec. 11.12mm/sec.
T4200ES.QX33 00.11.28 5:07 PM Page 27 CONTROLES DE OPERACIÓN Y SUS FUNCIONES NOTA: No recomendamos utilizar mandos a distancia universales. No todas las funciones pueden ser controladas mediante un mando a distancia universal. Si decide utilizar un mando a distancia universal con esta unidad, tenga en cuenta que con el número de código dado tal vez no se pueda controlar la unidad. En este caso, póngase en contacto con el fabricante del mando a distancia universal.
T4200ES.QX33 00.11.28 5:07 PM Page 28 PREPARACIÓN PARA LA UTILIZACIÓN CONEXIONES DE ANTENA/CABLE CONEXION DE LA ANTENA BIPOLAR 1. Introduzca la varilla de la antena bipolar (accesorio) en el orificio destinado para la antena, en la parte trasera de la TV/VCR. 2. Conecte el cable bifilar plano de la antena bipolar al adaptador de acoplo (accesorio) de 300/75 ohm. 3. Enchufe el adaptador de acoplo al terminal ANT de la TV/VCR, como lo muestra el dibujo.
T4200ES.QX33 00.11.28 5:07 PM Page 29 PREPARACIÓN DE CANALES POR PRIMERA VEZ AJUSTE DEL RELOJ 1) Conecte el extremo más prqueño del cordón de CA al conector de CA de 120V en la parte posterior de la TV/VCR. Luego, enchufe el otro extremo enun tomacorriente normal de CA. NOTAS: Dede desconectar de la TV/VCR el cordón para la batería del automóvil antes de usar la alimentación de CA. Si aparezcan algunos digitos en el rincón de la pantalla, pulse el botón POWER sin desenchufar el cable de alimentación.
T4200ES.QX33 00.11.
T4200ES.QX33 00.11.
T4200BCV.QX33 00.11.28 5:05 PM Page 32 FUNAI CORPORATION LIMITED WARRANTY FUNAI CORP. will repair this product, free of charge in the USA in the event of defect in materials or workmanship as follows: DURATION: PARTS: FUNAI CORP. will provide parts to replace defective parts without charge for one (1) year from the date of original retail purchase. Two (2) years for Picture Tube. Certain parts are excluded from this warranty. LABOR: FUNAI CORP.
