T5206.QX33 01.3.19 10:05 AM Page 1 OWNER’S MANUAL COLOR TV/VCR DSC313B (13 inch) This Owner’s Manual is made of recycled paper. As an ENERGY STAR ® Partner, our company has determined that this product meets the ENERGY STAR ® guidelines for energy efficiency. ENERGY STAR ® is a U.S. registered mark. INSTRUCCIONES EN ESPAÑOL INCLUIDAS.
T5206.QX33 01.3.19 10:05 AM Page 2 WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. RISK OF ELECTRIC SHOCK DO NOT OPEN THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
T5206.QX33 01.3.19 10:05 AM Page 3 F IGURE A EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECT RICAL CODE ANTE NNA L EAD I N WI RE GROUND CLAMP A NTENNA DI SCHARG E UN I T (NEC SECTION 8 10 -2 0) EL ECT RI C SE RV I CE EQ U I PM EN T G RO UNDI NG CO NDUCT ORS (NEC SECTION 8 10 -2 1) G RO UND CL AM PS NEC - NATI O NAL EL ECTRI CAL CO DE POWER SERVI C E G RO UNDI NG EL EC TR O DE SYST EM (NEC ART 2 50 , PART H) S2 8 9 8 A 13.
T5206.QX33 01.3.19 10:05 AM Page 4 PRECAUTIONS LOCATION For safe operation and satisfactory performance of your TV/VCR, keep the following in mind when selecting a place for its installation: • Shield it from direct sunlight and keep it away from sources of intense heat. • Avoid dusty or humid places. • Avoid places with insufficient ventilation for proper heat dissipation. Do not block the ventilation holes at the top and bottom of the unit.
T5206.QX33 01.3.19 10:05 AM Page 5 TABLE OF CONTENTS STILL PICTURE . . . . . . . . . . . . . . . . . . . . . . .19 NOISE CANCEL (in the Still mode) . . . . . . . .20 VERTICAL HOLD CONTROL . . . . . . . . . . . .20 TRACKING ADJUSTMENT . . . . . . . . . . . . . .20 RENTAL PLAYBACK . . . . . . . . . . . . . . . . . . .20 C IMPORTANT SAFEGUARDS . . . . . . . . . . . . .2 C PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . .4 C FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . .
T5206.QX33 01.3.19 10:05 AM Page 6 FEATURES • Infrared remote control • Bilingual on screen menu display selectable in • • Still–“Freeze” the picture at any time, for close English or Spanish Real time counter–This shows the elapsed record- • ing or playback time in hours, minutes, and seconds. The “–” indication will appear when the tape is rewound further than the tape counter position “0:00:00”.
T5206.QX33 01.3.19 10:05 AM Page 7 OPERATING CONTROLS AND FUNCTIONS - TV/VCR FRONT PANEL - AUDIO VIDEO STOP/EJECT rREW PLAY F.FWDq REC/OTR CHANNEL VOLUME POWER EARPHONE 1 2 3 4 5 6 7 8 9 10 11 - REMOTE CONTROL - 25 WAKE-UP /SLEEP POWER 13 15 16 17 5 CHANNEL RETURN 1 2 3 4 5 6 7 8 9 0 +100 MENU DISPLAY MUTE CHANNEL 19 20 VOLUME PLAY REW F.FWD 4 24 11 12 23 6 7 STOP 4 8 18 EJECT RECORD T-PROG.
T5206.QX33 01.3.19 10:05 AM Page 8 - REAR VIEW DC 13.2V AC 120V ANT. 26 27 7 F.FWD button– Press to rapidly advance the tape, or to view the picture rapidly in forward during playback mode. (Forward Search) B button– • When setting program (for example: setting clock or timer program), press to determine your selection and proceed to the next step you want to input. • Press to determine setting modes from on screen menu. • Press to select a mode from a particular menu.
T5206.QX33 01.3.19 10:05 AM Page 9 PREPARATION FOR USE ANTENNA/CABLE CONNECTIONS Satellite Box or OUT Cable Box (Not supplied) From Cable System or Satellite Dish VHF/UHF Antenna (Not supplied) Rod Antenna (Supplied) IN VHF Antenna (Not supplied) From Cable System UHF Antenna (Not supplied) or VHF/UHF or Combiner or 75-ohm Coaxial Cable (Not supplied) (Not supplied) ANT.
T5206.QX33 01.3.19 10:05 AM Page 10 TO RECORD A SCRAMBLED/UNSCRAMBLED CHANNEL 1.Set the TV/VCR channel selector to the output channel of the Cable Converter Box or Satellite Box. (Ex. CH3) 2.Select the channel to record from your Cable Converter Box or Satellite Box. EXTERNAL INPUT MODE When using an external input signal (another VCR or video camera), connect the player’s audio/video output cables to the AUDIO IN/ VIDEO IN jacks of your TV/VCR.
T5206.QX33 01.3.19 10:05 AM Page 11 SET UP FOR USE You can program the tuner to scan all the channels you receive in your area. NOTE: Channel memory programming is NOT needed when connected to a cable box or satellite box. Just select the TV/VCR channel selector to the output channel of the cable box or satellite box (Ex CH3). Then select the channel to be viewed on the Cable Box or Satellite Box.
T5206.QX33 01.3.19 10:05 AM Page 12 CLOCK SET UP (AUTO / MANUAL) 1 Select “SETTING CLOCK” Press the MENU button on the remote control. Press the PLAY/K or STOP/L button to point to “SETTING CLOCK”. Then, press the F.FWD/B button. Set the clock accurately for proper automatic timer recording. If the Public Broadcasting Station (PBS) is available in your area, follow “AUTO CLOCK SETTING”. If it is not, follow “MANUAL CLOCK SETTING”.
T5206.QX33 1 01.3.19 10:05 AM Page 13 –MENU– Press the MENU button on the remote control. Press the PLAY/K or STOP/L button to point to “SETTING CLOCK”. Then, press the F.FWD/B button. 2 TIMER PROGRAMMING PICTURE CONTROL B SETTING CLOCK CHANNEL SET UP USER’S SET UP V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [OFF] ZERO RETURN TIME SEARCH Select the month Press the PLAY/K or STOP/L button until your desired month appears. (Example: May → 05) Then, press the F.FWD/B button.
T5206.QX33 1 01.3.19 10:05 AM Page 14 Press the MENU button on the remote control. Press the PLAY/K or STOP/L button to point to “CHANNEL SET UP”. Then, press the F.FWD/B button. 2 Select “ADD/DELETE CH” Press the PLAY/K or STOP/L button to point to “ADD/DELETE CH”. Press the F.FWD/B button. 3 3 NOTE: If for some reason the menu is in Spanish, press the MENU button on the remote control, press the PLAY/K button to point to “IDIOMA [ESPAÑOL]”, then press the F.
T5206.QX33 01.3.19 10:05 AM Page 15 TV OPERATION WATCHING A TV PROGRAM 1 PICTURE CONTROL Turn on the TV/VCR Press the POWER button to turn on the TV/VCR. 2 Select the channel number Press the CHANNEL K or L button to select your desired channel number or press the number buttons on the remote control. Remember: If the TV/VCR is connected to a cable box or satellite box, the TV/VCR must be on CH3 or CH4, then the channel to be viewed must be selected on the cable box or satellite box.
T5206.QX33 01.3.19 10:05 AM Page 16 TO CANCEL THE CLOSED CAPTION SYSTEM CLOSED CAPTION SYSTEM You can view specially labeled (cc) TV programs, movies, news, pre-recorded tapes with either a dialogue caption or text display. CAPTION mode: By choosing the caption mode, you can watch dramas, movies and news while captioning the dialogues and the contents of news. TEXT mode: By choosing the text mode, you can watch half screen text information if you want.
T5206.QX33 3 01.3.19 10:05 AM Page 17 4 Select your desired item Press the PLAY/K or STOP/L button to point to your desired item. Then, press the F.FWD/B button to select [BLOCK] or [VIEW]. B TV–Y TV–Y7 ( TV–G TV–PG ( TV–14 ( TV–MA ( ) ) ) ) MPAA RATING SET UP Make sure ... • TV/VCR power must be turned on. • When you select the rating category and turn it • Exit the V-Chip setting mode Press the MENU button on the remote control to return to original mode.
T5206.QX33 01.3.19 10:05 AM Page 18 PLAYBACK This TV/VCR will operate with any cassette that has the mark. For best results, we recommend the use of high-quality tapes. Do not us poor quality or damaged tapes. INSERTING A CASSETTE AUTO REPEAT PLAYBACK Insert the cassette in the direction as shown. Push in gently, but continuously, on the center-back of the cassette until it is drawn into the TV/VCR. The TV/VCR will automatically turn on.
T5206.QX33 01.3.19 10:05 AM Page 19 SEARCH PICTURE SEARCH This feature is very useful in finding or skipping over a particular scene on a tape. In this mode, the sound will be muted. 1)You may view a video tape at a high speed in either a forward or reverse direction by pressing the F.FWD or REW button during playback. (in the SP / LP / SLP modes) 2)Press it again and the TV/VCR will now search in super high speed.
T5206.QX33 01.3.19 10:05 AM Page 20 NOISE CANCEL (in the Still mode) This feature allows you to reposition or reduce the noise lines of a still picture. Press the PAUSE/STILL button so that the noise lines change position on the screen so you can see the picture in its entirety without distracting noise lines. NOTE: This feature can be activated ONLY when viewing a tape recorded in the SLP mode.
T5206.QX33 01.3.19 10:05 AM Page 21 Make sure ... • TV/VCR power must be turned on. • Insert a cassette tape with its erase prevention tab in place. (If necessary, rewind or fast forward the tape to the point at which you want to begin recording.) NOTE: This unit will ONLY record and view the same channel. NORMAL RECORDING OTR (One Touch Recording) You can ONLY watch the same TV program that is being recorded.
T5206.QX33 3 01.3.19 10:05 AM Page 22 Avoid over lap of programs ... There is a chance that a program will not be recorded. when programs overlap; • The program with an earlier start has priority. • Once the earliest program finishes, the overlapping programs will begin recording in sequence. • The illustration below demonstrates the sequence of recordings. Begin OTR OTR(2 : 30) Press the REC/OTR button on the TV/VCR as many times as needed.
T5206.QX33 01.3.19 10:05 AM Page 23 For every day recording : To record a TV program at the same time on the same channel every day. (Example: Monday through Sunday) 10 – TIMER PROGRAMMING – CH DATE BEGIN END - - -/- - - - - -:- - -/- - - - - -:- - -/- - - - - -:B 61 EVRY DAY -:- - -/- - - - - -:- - -/- - - - - -:- - -/- - - - - -:- - -/- - - - - -:- - -:- -:- -:- -:- -:- -:- -:- -:- - - - Press the STOP/L (down) button until “EVRY DAY” appears. Then, press the F.FWD/B button. Press the F.
T5206.QX33 01.3.19 10:05 AM Page 24 TO CANCEL AN AUTOMATIC TIMER RECORDING 2 • After setting a program; • 1)Press the POWER button. 2)Repeat steps [1] ~ [2] on page 22 and select a program you want to cancel. 3)Press the T-PROG. CLEAR button. 4)Press the MENU button on the remote control to return to TV mode. While recording is in progress; 1)Press POWER button. 2)Press the STOP/EJECT button on the TV/VCR. TO CHECK THE BEGIN/END TIME 1)Press the POWER button so that the REC indicator goes off.
T5206.QX33 2 01.3.19 10:05 AM Page 25 SLEEP TIMER Select “TV” or “TAPE” Press the PLAY/K or STOP/L button until to point to “TV/TAPE”. Press the F.FWD/B or REW/s button, and select [TV] or [TAPE]. 3 WAKE UP ON/OFF TIMER B TV/TAPE TIME [ON] [TV] [12:00AM] Set wake up time Press the PLAY/K or STOP/L button until to point to “TIME”. Press the F.FWD/B or REW/s button until your desired wake up time appears. Each additional push will increase (or decrease) the time by 10 minutes.
T5206.QX33 01.3.19 10:05 AM Page 26 ON SCREEN DISPLAY To check the Counter, Clock and Channel number on the TV screen, press the DISPLAY button on the remote control. Each time you press the DISPLAY button on the remote control, the TV screen will change as follows: WHEN THE CLOSED CAPTION MODE IS OFF: • Counter mode: After 5 seconds, only • the counter remains. To clear it, press the DISPLAY button. Clock mode: After 5 seconds, only the clock and the channel number remain.
T5206.QX33 01.3.19 10:05 AM Page 27 TROUBLESHOOTING GUIDE If you have followed the instructions contained in this manual and have difficulty in operating your TV/VCR, locate the PROBLEM in the left column below. Check the corresponding CORRECTIVE ACTION column to remedy the problem. PROBLEM No power. No picture and sound. No picture or poor picture on TV/VCR. No sound or poor sound. Timer recording is not possible. Cannot go into Record mode. Playback picture is partially noisy.
T5206.QX33 01.3.19 10:05 AM Page 28 SPECIFICATIONS GENERAL SPECIFICATIONS ELECTRICAL SPECIFICATIONS CRT : Video input level : Audio input level : Video S/N ratio : Audio S/N ratio : 13 inch in-line gun, 90˚ deflection tube Television system : NTSC-M Closed caption system :§15.119/FCC Video Heads : Rotary two-head Tape width : 1/2 inch Tape speed SP : 33.40mm/sec. LP : 16.67mm/sec. SLP : 11.12mm/sec.
T5206ES.QX33 01.3.19 10:16 AM Page 29 CONTROLES DE OPERACIÓN Y SUS FUNCIONES - PANEL DELANTERO - AUDIO VIDEO STOP/EJECT rREW PLAY F.FWDq REC/OTR CHANNEL VOLUME POWER EARPHONE 1 2 3 4 5 6 7 8 9 10 11 - CONTROL REMOTO 25 WAKE-UP /SLEEP POWER 13 15 16 17 5 CHANNEL RETURN 1 2 3 4 5 6 7 8 9 0 +100 MENU DISPLAY MUTE CHANNEL 19 20 VOLUME PLAY REW F.FWD 4 24 11 12 23 6 7 STOP 4 8 18 EJECT RECORD T-PROG.
T5206ES.QX33 01.3.19 10:16 AM Page 30 - PANEL TRASERO - DC 13.2V AC 120V ANT. 26 27 • Púlselo para determinar los modos de ajuste desde el menúde la pantalla. • Púlselo para seleccionar un modo desde un menúparticular. (Por ejemplo: IDIOMA o ADJUST DE USER) 8 Botón de grabación (REC)– Púlselo para iniciar la grabación manual. Botón de grabación de un toque (OTR)– Activa la grabación de un toque. (Sólo en el televisor/videograbadora) 9 Indicador de grabación (RECORD)– Parpadea durante la grabación.
T5206ES.QX33 01.3.19 10:16 AM Page 31 CONEXIONES DE ANTENA/CABLE Caja de CATV o caja de emisiones vía satélite (no incluído) OUT Desde el cable coaxial o caja de emisiones vía satélite de 75 ohm del sistema de Cable IN Antena de varilla UHF/VHF (incluído) Antena combinada de VHF/UHF (no incluído) Antena VHF (no incluído) Desde el sistema de Cable Antena UHF (no incluído) o Combinador de o VHF/UHF (no incluído) ANT.
T5206ES.QX33 01.3.19 10:16 AM Page 32 NOTAS: • Asegúrese de que el vehículo tenga un sistema eléctrico de 13,2 voltios con negativo a masa. • Asegúrese de utilizar solamente el cable de batería de automóvil suministrado. La utilización de otro cable puede estropear el televisor/videograbadora. • Asegúrese de que el zócalo no tenga ceniza ni otros restos de materiales.
T5206ES.QX33 01.3.19 10:16 AM Page 33 PREPARACIÓN DE CANALES POR PRIMERA VEZ AJUSTE DEL RELOJ 1) Coloque el extremo más pequeño del cable de CA suministrado en el conector AC 120V del panel trasero del televisor/videograbadora. Luego, enchufe el otro extremo en una toma de corriente estándar. NOTAS: • Deberá desconectar el cable de batería de automóvil del televisor/videograbadora antes de utilizar la alimentación de CA.
T5206ES.QX33 01.3.
T5206ES.QX33 01.3.
T5206BCV.QX33 01.3.19 10:15 AM Page 36 FUNAI CORPORATION LIMITED WARRANTY FUNAI CORP. will repair this product, free of charge in the USA in the event of defect in materials or workmanship as follows: DURATION: PARTS: FUNAI CORP. will provide parts to replace defective parts without charge for one (1) year from the date of original retail purchase. Two (2) years for Picture Tube. Certain parts are excluded from this warranty. LABOR: FUNAI CORP.
