Installation Guide

Reposition the panel and attach with
the three screws provided.
Add shims here to plumb
the panel as shown.
Add shims here to shift
the panel as shown.
5
If necessary, loosen the set screws and plumb the
panel by adding additional shims to one of the
bottom clips. Securely re-tighten the three set
screws with a flat screwdriver.
Attach & Adjust the panel
Caulk
Do not use the shower for 24 hours to allow the silicone to cure. Once the silicone has cured,
Clean your new Symphony door with a soft cloth and glass cleaner. Be sure to remove the
Enduroshield™ labels from the glass and follow the instructions to register for the ten year
warranty. Refer to the Enduroshield™ website for more detailed cleaning instructions.
Using a good grade of clear
silicone, seal the interior
and exterior of the glass
panel. Use the silicone to
fill the small gap at the
bottom of the panel and any
gap between the panel and
the wall. If you are not
comfortable with your
caulking skills, there are
number of excellent how-to
videos on YouTube.
6