Installation Guide

14
Do not use the door for 24 hours to allow the silicone to cure. Once the silicone has cured,
Clean your new Symphony door with a soft cloth and glass cleaner. Be sure to remove the
Enduroshield™ labels from the glass and follow the instructions to register for the ten year
warranty. Refer to the Enduroshield™ website for more detailed cleaning instructions.
Enjoy your new Symphony enclosure.
Using a good grade of clear
silicone, seal the interior
and exterior of the fixed
panel. Use the silicone to
fill the small gap at the
bottom of the panel and any
gap between the panel and
the wall. If you are not
comfortable with your
caulking skills, there are
number of excellent how-to
videos on YouTube.
If your wall is out of plumb more than 3/8”, the gap between your fixed panel and
the wall may be difficult to caulk. You may want to order the optional caulking
adaptor. A separate instruction sheet is included with the Caulking Adaptor.
To Order – Search “Caulking Adaptor” and specify the finish of your unit.
13
Gap is
Greater
than 3/8”
Caulking
Adaptor
You may also order an optional Clear
Acrylic Strike jamb using the part
number “Acrylic Strike Jamb”