Owner’s Manual DO NOT Return to store For help with installation or warranty issues call +1 725 726 4267 / +1 725 726 4227 or www.symphony-us.com For parts Visit our secure website www.symphony-us.com MOVIL 80 Please keep this important manual in a safe place. It is the owner’s responsibility to ensure that regular maintenance is carried out on this evaporative cooling product. Failure to do so will void all guarantees beyond statutory and legal requirements.
Symphony Cooler Introduction GENERAL INFORMATION Thank you for purchasing a quality Symphony Evaporative Cooler. We care about your safety and would ask you to spend a few minutes reading these simple instructions before installing or operating this product. Safety! Read carefully all of these instructions prior to installing and operating the unit. • Read and Save these Instructions. Do not throw these Instructions away. • Complete the unit assembly before attempting to install, refer to pages 7-8.
Symphony Cooler Table of Contents Introduction ............................................................................................................................................................... 2 Operation Instructions ........................................................................................................................................... 4 General.................................................................................................................................
Symphony Cooler Operation Instructions General Introduction Your evaporative air conditioner is engineered to meet the rigors of harsh environments. Used and maintained in accordance with this manual, it will provide you with years of quiet, cool and environmentally friendly operation. Please take the time to read this manual. How does your Evaporative Cooler work ? Warm air is drawn into the evaporative cooler and enter to High Efficiency filters.
Symphony Cooler Operation Instructions It is essential for successful operation of the evaporative cooler that there be sufficient free air openings in the room to be cooled – approximately 0.5m² (5.4² feet). Open doors and windows will usually provide this as per the diagrams below. Please Note: - It is important for good ventilation that doors or windows are not open on the windward side of the house.
Symphony Cooler Operation Instructions Product Specifications Drain Plug MODEL Voltage Amperage Tank Capacity Net Weight MOVIL 80 120 VAC, 60 Hz, 1 Phase 1.8 A 21 Gallons (80 Lts) 19 Kg Unit Dimensions Assembled (H X W X D) 45 in X 24 in X 19.
Symphony Cooler Installation Installation Requirements Tools • • • Cordless Screwdriver PH2 bits Phillips Head Screw Driver Materials Required (Not supplied) • Sillcock Valve - for water line connection to faucet (see pg. 9) Unit Casters Installation Please follow the instructions for a correct product assembly. DO NOT connect the power to the cooler until the installation is complete. • Remove the product from the packaging. • Locate the Casters kit.
Symphony Cooler Installation Introduce the screws into the holes of each block raisers and fit.
Symphony Cooler Installation Water Connection Install a sillcock (not supplied) to the faucet closest to the cooler. Using a Spout bucket or plastic hose, add clean water into the water inlets, to tank. Check the water level indicator on the Right Side of water tank to see when the water tank is full. Your cooler is now ready for startup checklist (see next page).
Symphony Cooler Installation Before Startup • • Check that another door or window in the room is open to allow air to exhaust to other parts of the house. Ensure that the filters are kept clean. • Ensure that the water tank is filled with clean water (at least 5 gallons or 20 liters). • Plug the cooler into a 110 V - 120 V~ 60 Hz single phase grounded appliance socket on the inside of the house and switch the socket on. • Press the COOL button to on the water pump.
Symphony Cooler Operation Instructions Operating the unit This Symphony cooler is only operated in Manual mode. This is selectable by pressing switches on the front panel. COOL, SWING and MOTOR functions are available. Manual Mode: 1 1 Motor OFF 2 Motor Speeds 3 COOL 4 Vertical Swing 1. Motor OFF : Stop Motor Operation 2. Motor Speeds: Press Motor Speed button, High , Med or Low, according to your comfort. 3.
Symphony Cooler Maintenance Before starting any maintenance work on your unit, ensure it is disconnected from the power supply. Note: It is essential that your evaporative air conditioner is maintained in accordance with this manual. Fai-lure to do so will affect the life of the product and reduce the level of efficiency. THIS MANUAL CONTAINS A 5 YEAR MAINTENANCE PLANNER TO USE IN CONJUNCTION WITH THE-SE INSTRUCTIONS. See page 14. Remove Rear and Side Filter Panels fixing screws (12 off).
Symphony Cooler Maintenance Electrical No general maintenance is required to the electrical system. Electrical connections and maintenance should only be carried out by a qualified electrician.
Symphony Cooler Maintenance 5 Year Maintenance Planner 1st Year PRESEASON CHECK FIRST MIDSEASON SERVICE SECOND MIDSEASON SERVICE END OF SEASON SERVICE AND SHUT DOWN 1.1 1.2 1.3 1.4 2.1 2.2 Check quality of filters Check Motor & pump Fill unit with water Start unit Check and clean filters Drain, clean and refill water tray 2.3 2.4 3.1 Check strainers and filters Check unit operates correctly Check and clean filters 3.2 3.3 3.4 4.
Symphony Cooler Problem Solving PROBLEM a b c d e PROBABLE CAUSE Power Failure Tripped Circuit Breaker Blown fuse Electrical Fault Motor Failure a b c d e a Not enought Water in Tank a b Pump failure b Filter Pads too wet c Electrical Fault with pump c Water leaking from Overflow holes a Water level exceeded in water tank a b REMEDY Wait for power to be turned on Reset circuit breaker Replace Call Symphony Care Line Change the motor Add clean water in tank (at least 5 Gallons / 20 Liters)
Symphony Cooler Warranty Condition of Warranty (U.S.A.) We extend this limited warranty to the original buyer (first retail purchaser) and warranty that the product shall be free from manufacturer defects in workmanship and materials for 12 months from the date of purchase. A. Warranty will come in with effect when following conditions are met with: a) Warranty registration card duly filled and received by the company within 10 days from the date of purchase.
