Owner Manual

1. Take a screw driver and take out the four screws ① that hold the back housing ② onto the light.

2. Take off back housing gently to avoid damaging the wires.

3. Unscrew the two screws ③ and remove the strap ④ that holds the battery down.

4. Pull out the connector ⑤ connecting to circuit board ⑥ from the battery ⑦.

5. Take off the old battery.

6. Replace new Li-ion battery with same size and mAh rating. Please contact your for purchase of a

replacement battery.

7. Screw the strap back down with one Phillips head screw.

8. Connect the connector to the battery.

9. Screw back cover on tightly with the four screws.

BATTERY CHANGING- REMOTE CONTROL

When light operation fails to operate from use of remote control it will require a new battery.

Remove back cover screw and replace with 23A / 12 volt battery.

②

①

⑤

③

④

⑥

⑦

Fig.3

③