Installation & Safety Instructions

60W
J-BOX
(3)
FIGURE 1
150W
TRACK & CABLE
(8) FUSED PLUGS
(8)
FIGURE 2
FINAL INSTALLATION AND FUSING
1. When using a 60w max transformer (class II)
you are able to directly hook up three (3) to
the junction box as in Figure 1.
2. For a run larger than three (3) disk-lights you
must use a class I transformer (larger than
60w). The following example demonstrates a
run of eight (8) disk-lights (8 x 16.2weach =
130w), in this case you will need to usea 150w
transformer.
Figure 2 demonstrates fusing each individual disk
light, with a fused plug.
There are several ways to install (disk-lights)
using the 18w, 12V xenon lamps(actual
consumption = 16.2w):