Owner Manual
OPERATING INSTRUCTIONS
INSTRUCTIONS DE MONTAGE
WARNING
1. Use this product only one person at a time.
2. Do not use this chair unless all bolts screws and knobs are
securely tightened.
3. Check that all bolts screws and knobs are tight every three
months or as needed.
4. Dispose of packing material properly. Do not use plastic cover
as head covering. It may cause suffocation.
5. Do not use chair as a stepladder.
6. Use this chair for its intended purpose only.
7. Use mild detergent only for cleaning.
LIMITED WARRANTY
Work Smart chairs are warranted from the date of purchase against failure due to material and workmanship as follows:
• 15 Years on all non-moving metal parts.
• 5 Years on component parts including Control mechanisms, pneumatic cylinders, wood, plastic parts, base and casters.
• 3 Years on upholstery fabric and foam against wear and deterioration.
To make a warranty claim, contact Parts Department. Provide model number, proof of purchase, description of the problem and
obtain return authorization.
(a) Supply compatible components of current manufacture.
(b) Repair the customer’s component. The customer must prepay freight on any components returned to the factory. Return
freight on components still in warranty will be paid by us.
*All warranties are limited to the original purchaser for normal commercial usage defined as a standard forty hour work week by persons weighing 250 lbs. or
less. This warranty will not cover labor, freight or damage from misuse, abuse, negligence, alteration, accident, vandalism, rusting, acts of nature or any other
event beyond our control . The warranty does not cover cosmetic damage that may result from normal use. Liability for incidental or consequential damages
is excluded. The user assumes all risk of injury resulting from use of this product. When usage is more than 40 hours per week, a two year warranty on all
parts applies. Fabric and foam is warranted for one year. This warranty gives you specific legal rights, and you may also have other rights which vary from
state to state.
Enlever toutes les pièces du carton, les organiser selon les numéros de pièce indiqués
sur la liste et vérifier les quantités des pièces.
ÉTAPE 1 Fixer les accoudoirs (3L et 3R) au coussin du siège (2) avec quatre vis de type Phillips (5) pour chaque accoudoir.
ÉTAPE 2 Fixer le coussin du dossier (1) aux accoudoirs (3L et 3R) avec deux vis de type Phillips (4) pour chaque accoudoir.
RESSERRER COMPLÈTEMENT TOUTES LES VIS AVEC UN TOURNEVIS DE TYPE PHILLIPS (non fourni).
ATTENTION : AVANT D’UTILISER LE FAUTEUIL, VOUS ASSURER D’AVOIR RESSERRÉ COMPLÈTEMENT TOUTES LES VIS.
1
2
3L
4
5
3R
4
5
PIÈCE QTÉ
1. Coussin arrière
............1
2.
Coussin du siège ...........1
3.
Accoudoirs (3L et 3R) .......2
4.
Vis de type Phillips (ronde) ...4
5.
Vis de type Phillips (hex) .....8