Installation & Assembly

ManualsBrandsSymple Stuff ManualsDesksHuntsberry Desk

1 -

page 2-4

page 5-7

LEA ESTAS INSTRUCCIONES ANTES DE ENSAMBLAR EL PRODUCTO Y CONSERVE PARA FUTURAS REFERENCIAS.

• No pararse sobre el PRODUCTO

• Dejar de usar el producto si le faltan partes, están rotas, dañadas o desgastadas hasta que estas sean reparadas

• No seguir las indicaciones anteriores, puede resultar en algún accidente serio

ADVERTENCIA:

Summary of content (9 pages)

PAGE 1
LEA ESTAS INSTRUCCIONES ANTES DE ENSAMBLAR EL PRODUCTO Y CONSERVE PARA FUTURAS REFERENCIAS.
PAGE 2
A x8 B x22 C x13 D x13 E x6 F x26 refer to the additional instruction for C,D 1 4 5 G 3 x2 2 6 H x2 I 8 x16 7 6 1 Two people are recommended to install.
PAGE 3
4 Part D has a triangle sign and an arrow sign. 5 1 6 8 D x9 Make all wooden wedges below 6 the desktop correspond to holes in the frame below. 2 Align the triangle with the screw hole, and then turn part D clockwise to make a firm connection between the plates.
PAGE 4
9 10 F F x22 11 -4- x4
PAGE 5
[How to attach the cam nut joint pin] with this product. : Use the cam nut and the team joint bin as a set. Due to the special mounting method, the following mounting method cam nut Please read it carefully and perform the assembly work. joint pin [Joint Pin Attachment Diagram] The joint pins may be too shallow or too deep to break the catch and prevent the cam nut from being engaged In addition, the receiving part of the item sometimes sticks out from the main body.
PAGE 6
A x8 B x22 C x13 D x13 E x6 F x26 G refer to the additional instruction for C,D 1 4 3 5 x2 2 6 H x2 I 8 x16 7 6 1 Two people are recommended to install.
PAGE 7
4 Part D has a triangle sign and an arrow sign. 5 1 6 8 D x9 Make all wooden wedges below 6 the desktop correspond to holes in the frame below. 2 Align the triangle with the screw hole, and then turn part D clockwise to make a firm connection between the plates.
PAGE 8
9 10 F x22 F 11 -7- x4
PAGE 9
[How to attach the cam nut joint pin] with this product. : Use the cam nut and the team joint bin as a set. Due to the special mounting method, the following mounting method cam nut Please read it carefully and perform the assembly work. joint pin [Joint Pin Attachment Diagram] The joint pins may be too shallow or too deep to break the catch and prevent the cam nut from being engaged In addition, the receiving part of the item sometimes sticks out from the main body.