Other
How to Measure:
• Use a steel tape measure for more accuracy.
• Round each measurement to the nearest ½”.
• Record width (Left to Right) first and then height (Top to Bottom) example, 20W x 64H
• For Inside Mounting: Deduct ½” from the overall width for mounting hardware and to allow the blinds/shade to
raise and lower freely.
• For Outside Mounting: The blind/shade covers more than just the window frame; add an overlap of 1” to 2” on
How to Measure for an Inside Mount:
Width:
• Measure inside the window frame
• Measure across (left to right) in three parts (top, middle, bottom)
• Select the smallest width, this will allow the blind or shade to raise or lower freely.
• Place order with exact width needed, including any allowances
How to Measure for an Outside Mount:
Width:
• Measure outside the window frame or width of the area you want to be covered.
• Measure across in three parts (top, middle, bottom)
• Add 1 to 2 inches, this will allow the blind or shade to cover the window opening.
• Place order with exact width needed
each side for additional privacy and light blocking.
• Contact customer service or email us for additional help.
Depth:
• Find the product depth in “Product Specifications”
• Make sure the window frame is deep enough to fit your product.
• Measure the depth from the wall to the window glass or metal frame.
Height:
• Measure inside the window frame
• Measure top to bottom in three parts (left, middle, right)
• Select the longest length to make sure the blind or shade cover window opening completely.
• Measure molding or wall above the window first to make sure you have at least 2” of flat
space of molding or wall.
Height:
• Measure outside the window frame or length of the area you want to be covered.
• Measure top to bottom in three parts (left, middle, right)
• Select the longest length to make sure the blind or shade cover window opening completely.