Owner Manual

USER MANUAL
Rechargeable Reading
Lamp
USB
Rechargeable
Low
High
ANSI/PLATO FL1 STANDARD
4 lm
161 lm
LUMENSMODES
75h
10h
RUN TIME
1m
1m
Medium 8 lm 28h 1m
BEAM
DISTANCE
On/O: Press and release the button on the head of the reading
lamp to turn it on and o.
Cycle Modes: Press button repeatedly to cycle through modes
(Low/Medium/High).
Operation Instructions
Rechargeable battery is sealed, and replacement is not necessary.
The product has a charge time of approximately 2 hours.
The product uses a Li-Poly; 3.7V 1000mAh
rechargeable battery.
To charge the reading lamp, rst locate the
charging port on the back of the body of the
reading lamp. Plug the smaller end of the
supplied USB cable into the charging port, and
the larger end into a USB power source.
A red light on the body of the reading lamp
will light up to indicate that the lamp is charging.
It will turn green once the light is fully charged.
Charging Instructions
The product has a Limited 90-Day Warranty Against
Manufacturer’s Defects from time of purchase.
For warranty claims please contact us.
Product Warranty
Warm color temperature for reduced eye strain
Built-in rechargeable battery (1000mAh Li-ion)
3000K Warm SMD LED Technology
Strong, padded, gator style clip to attach to books
Features