Installation & Assembly

Table Of Contents

WARNING:

>This unit has been designed to support the

maximum loads shown. Exceeding these

load limits could cause sagging, instability,

product collapse, and/or serious injury.

>DO NOT allow children to climb on unit.

>Put heavier items on lower shelves.

Fix Top Cap (2) on top of the Shelf Panel (A),

as shown.

STEP 2

Recommended Maximum Weight

Assembly Instruction

5-Tier Multipurpose Shelf Display Rack

*Unit in Pound(lbs)

In order to prevent product tip over, please follow the

instruction below to secure the unit to the wall.

STEP 3

CABLE

TIE

WALL

1 SET

WALL PLUG

1/4’’

DRILL BIT

HARDWARE PARTS LIST QTY

WALL PLUG EYELET SCREW

CABLE TIE

EYELET SCREW

No Tools Required

Recomm. 1 Person

Approx. 15 minutes

PAGE 1
STEP 2 STEP 3 Fix Top Cap (2) on top of the Shelf Panel (A), as shown. In order to prevent product tip over, please follow the instruction below to secure the unit to the wall. HARDWARE PARTS LIST Assembly Instruction QTY 5-Tier Multipurpose Shelf Display Rack 1 SET WALL PLUG EYELET SCREW CABLE TIE A 2 WALL PLUG EYELET SCREW 1/4’’ DRILL BIT WALL Approx. 15 minutes 1 WALL CABLE TIE Recomm.
PAGE 2
No Hardware List Qty 1 Long Pole 16pcs 2 Top Cap 4pcs 3 Round Leg 4pcs No A Parts List Shelf Panel Qty 5pcs STEP 1 1.1 1.2 Attach Round Leg (3) to the bottom of Shelf Panel (A) and tighten to Long Pole (1) . Attach another Shelf Panel (A) and repeat the steps, as shown. 1 2 STEP 1.4 A 1 1 1 A A 1 STEP 1.3 1 1 1 1 A A 1 A 1 STEP 1.2 A 1 A 3 1 1 USEFUL HINTS BEFORE YOU START: 1. Read each step carefully before starting. 2.