Assembly Instructions

Page 6
Figure 5
Connect Back Panels (10) to assembled unit on
figure 4 with Screws (E).
Tighten Screws (E) with Phillips screwdriver.
Figure 6
Attach Brackets (G) to the Left Bookcase Top
(1) and Right Bookcase Top (2) with Screws
(J).
Tighten Screws (J) using Philips screwdriver.
Mark two desired locations on the wall and drill
two 3/16" holes.
Insert Anchors (H) into the two holes on wall as
shown. Use a hammer to insert the Plastic
Anchors until they are flush with the wall.
Then attach the Brackets (G) onto the wall
using Screws (I).
Tighten Screws (I) using Philips screwdriver.