Glazed Pine Ivory Plantation Oak Classic Mahogany Pair of Bookcases Assembly Instructions Page 1
Pair of Bookcases Parts List Please check packaging for all parts and hardware before discarding. Unpack and lay parts on clean, padded surface like carpet or blanket. Check that you have all parts indicated. Call customer service if hardware is missing. Before beginning assembly, carefully study the diagrams below and sort your hardware according to the pictures. Using the incorrect hardware will cause damage.
A Quantity Of 24 Wood Dowel D Plastic Cover G Bracket J B Quantity Of 32 Dia 8 x 30mm Cam Bolt Quantity E Of 20 Quantity Of 4 Screw H Quantity Of 32 Dia 1/8’’ x 1/2”L Quantity Of 4 Anchor Quantity K Of 4 Quantity Of 2 Screw Dia1/8”x5/8”L Plastic Strap Care and Cleaning Instructions: Before using, wipe with a clean, dry cloth. Periodically apply furniture wax to renew the finish. Avoid rubbing or scratching the surface with rough or abrasive objects. Assembly Tool Required No.
Pair of Bookcases Assembly Instructions Start tightening Cam Bolts with fingers to help with alignment. Insert Cam Locks (C) into holes on Fixed Shelves (9). Screw Cam Bolts (B) and insert Wood Dowels (A) into holes on Side Panels (5), (6), (7) and (8). Attach Fixed Shelves (9) to Side Panels (5), (6), (7) and (8) by inserting Wood Dowels (A) and Cam Bolts (B) into corresponding holes until Side Panels (5), (6), (7), (8) and Fixed Shelves (9) meet.
Start tightening Cam Bolts with fingers to help with alignment. Insert Cam Locks (C) into holes on assembled unit on figure 2. Screw Cam Bolts (B) into holes on Left Bookcase Base (3) and Right Bookcase Base (4). Attach assembled unit on figure 2 to Left Bookcase Base (3) and Right Bookcase Base (4) by inserting Cam Bolts (B) into corresponding holes until Left Bookcase Base (3), Right Bookcase Base (4), and assembled unit on figure 2 meet.
Connect Back Panels (10) to assembled unit on figure 4 with Screws (E). Tighten Screws (E) with Phillips screwdriver. Figure 5 Attach Brackets (G) to the Left Bookcase Top (1) and Right Bookcase Top (2) with Screws (J). Tighten Screws (J) using Philips screwdriver. Mark two desired locations on the wall and drill two 3/16" holes. Insert Anchors (H) into the two holes on wall as shown. Use a hammer to insert the Plastic Anchors until they are flush with the wall.
Place the bookcase beside and move this item close to the Wall Brackets (G) and tie in all Brackets (G) together with Plastic Straps (K) as shown in diagram. Anti-tipping hardware must be used for this product to avoid tipping and injury. Figure 7 Now your new bookcase fireplace is ready to use.
Parts Replacement Form Customer Information Name Address City/State/Zip Code Phone Number Please indicate where you purchased this item: Store/Website/Catalog Please indicate color/size/style number: Style No Parts Letter Parts Description Quantity Needed Please immediately examine this product carefully. Parts will not be available for items arriving fully assembled. We do not recommend modifying product(s) and we are not responsible for any damages due to product modification(s).