Installation & Assembly

3
WARNING
PREPARATION
This product includes a GLASS panel! Always use extreme caution when handing
glass. Failure to do so could result in personal injury or property damage.
⚫ For residential use only! NOT for commercial use! Any commercial or public use of this
heater videos all warranties and could cause injury.
⚫ This product is not intended to be a primary heater source. It is for supplemental heat
only.
⚫ INDOOR use only! NEVER use this heater outdoors! Doing so may result in electric shock!
⚫ Risk of electric shock! DO NOT OPEN! No user-serviceable parts inside!
⚫ NEVER modify this heater. Doing so could result in personal injury or property damage.
Modification of this fireplace completely voids all warranties.
⚫ Always turn of this heater off before unplugging it from outlet.
⚫ ALWAYS disconnect this unit from the power supply before performing any assembly or
cleaning, or before relocating the electric fireplace.
⚫ NEVER leave this heater unattended. ALWAYS unplug this heater when not in use.
⚫ ALWAYS store this heater in a dry location. NEVER use the fireplace if it has become wet
⚫ ONLY use this heater on a 120 Volt 15 Amp grounded circuit. NEVER overload the circuit. If
this heater trips the circuit breaker, unplug all other appliances on the same circuit before the
next use. Avoid plugging other appliances into the same circuit as this heater.
⚫ NEVER plug this heater into an outlet that is old, cracked, or has any loose wires or
connections. Plugging this heater into faulty outlet could result in electric arcing within the
outlet that could cause the outlet to overheat or catch fire.
⚫ ALWAYS check your heater cord and plug connections with each use!
i) MAKE SURE the plug fits tight in the outlet! Faulty wall outlet connections or loose plugs
can cause the outlet to overheat.
ii) Heaters draw more current than small appliances. Overheating may occur even if it
has not occurred with the use of other appliances.
iii) During use check frequently to see if the plug outlet or face plate is HOT!
iv) If the outlet or face plate is HOT, discontinue use immediately and have a qualified
electrician inspect and/or replace the faulty outlets.
SAVE THESE INSTRUCTION