Owner Manual

4
Control Panel
Remote Control
Toggles between power ON and OFF.
Toggles between power ON and OFF.
Press FLAME+ to brighten the flame through
the 6 flame levels.
Press FLAME− to darken the flame.
Toggles through 6 levels of flame brightness when the flame is ON.
Press once to activate the fan and start the low level heater. Press
again to start the full heater. Press again to turn off the heater. The
fan will blow cool air and then turn off automatically.
Turns the fireplace off after a set amount of time from 1–8 hours.
DO NOT press the buttons too quickly. Give the unit time to respond to each command.
BUTTON
BUTTON
ON/OFF
OPERATION IMAGE
NOTE
OPERATION
FLAME