ASSEMBLY INSTRUCTIONS Assembly Instruction ASSEMBLY TIPS: 1. Remove hardware from box and sort by size. 2. Please check to see that all hardware and parts are present prior to start of assembly. 3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly. A Warning ! 1. Don't attempt to repair or modify parts that are broken or defective. Please contact the store immediately. 2. This product is for home use only and not intended for commercial establishment. 3.
ASSEMBLY INSTRUCTIONS PARTS IDENTIFICATION HARDWARE PACKAGE A 1pC (1 PCS Ir SPACERS MAIN FRAME 1PC WASHER CUSHION cL SA Tre 2) 4 PCS LEFT ARMREST 1/4” x 42mm FLAT HEAD BOLT SMALL cw | Fe RIGHT ARMREST “ 2 PCS : M8 x 45mm D 1PC FLAT HEAD BOLT LARGE OTTOMAN Page 3 of 5
ASSEMBLY INSTRUCTIONS STEP 1: Connect the right and left arm frames to the chair back by using 2 large flat head bolts {4} 4 spacers (1) and 2 washers (2} as shown. MMe STEP 2: Slide the chair cushion over the back frame. Then slide the chair cushion over the seat frame and attach the loop over the notch on both sides.
ASSEMBLY INSTRUCTIONS STEP 3: Position the arm rest so that the holes in the side frame match the holes in arm rest. From the underside fasten the arm rest by using 2 small flat head bolts (3) as shown. a +. Attach the loop of the arm cushion aver the rod on the side frame. Repeat “for the opposite side.
