ASSEMBLY INSTRUCTIONS
ASSEMBLY INSTRUCTIONS ASSEMBLY TIPS: 1. Remove hardware from box and sort by size. 2. Please check to see that all hardware and parts are present prior to start of assembly. 3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly. WARNING! 1. Don’t attempt to repair or modify parts that are broken or defective. Please contact the store immediately. 2. This product is for home use only and not intended for commercial establishments.
ASSEMBLY INSTRUCTIONS PARTS IDENTIFICATION G FOURTH SHELF 1PC HARDWARE IDENTIFICATION 1 NUT (1/4" SR) 16PCS 2 BOLT (1/4" x 18mm SR) 16PCS 3 SCREW (3/16" x 12mm SR) 8PCS 4 FLOOR PROTECTOR (∅15 x 2mm) 2PCS 5 ALLEN WRENCH (4mm) 1PC PAGE 3 OF 7 .
ASSEMBLY INSTRUCTIONS STEP 1 Do not tighten until each step is completed or instructed. A 1 2 1 D 2 E 1 2 F 1 2 G STEP 2 B 2 1 2 1 2 1 2 1 PAGE 4 OF 7 .
ASSEMBLY INSTRUCTIONS STEP 3 3 C 3 3 C 3 4 4 STEP 4 How to clean Acrylic product: Using a dry soft microfiber cloth, lightly brush off any dust. For additional care, dampen the cloth with warm water. For deepest cleaning, use an Acrylic cleaner. PAGE 5 OF 7 .
ASSEMBLY INSTRUCTIONS Product Size : 622 X 457 X 1835 H (MM) Product Size : 24 21" X 18" X 72 41" 350 5 30 1835 mm 75 290 62 2 57 0 5 35 1835 350 72 41" 205 350 5 40 622 mm 457 mm 24 21" 18" Note : Dimension tolerance ±5% PAGE 6 OF 7 5 45 7 45
ANTI-TIPPING INSTALLMENT INSTRUCTIONS FURNITURE TIPPING RESTRAINT WARNING Injury may result from tipping furniture. This restraint may protect against tipping furniture. Do not allow children to climb on furniture. This restraint is not a substitute for proper adult supervision. Failure to detach this restraint before moving the furniture may result in injury and damage. STEP 2 This tip restraint must be attached to a wall stud using long screw enclosed.
