ELECTRIC FIREPLACE INSERT USER MANUAL User Manual PRODUCT NO.: ZHS-23-N PLEASE READ THIS MANUAL CAREFULLY FOR ELECTRIC FIREPLACE INSERT BEFORE INSTALL AND USE. PLEASE DO NOT RETURN ANY PRODUCT TO STORE. FOR ANY MISSING PARTS, HARDWARE OR ASSEMBLY PROBLEMS, PLEASE CONTACT WITH OUR CUSTOMER SERVICE CENTER AT .
IMPORTANT SAFETY INSTRUCTION WARNING: Any use of this appliance other than that recommended by the manufacturer in this owners manual may cause fire, burns, electric shock and/or other serious injuries or death. When using electrical appliance, basic precautions should always be followed to avoid the risk of fire, electric shock and injury to persons including the following: 1. Read all instructions before using this appliance. 2. This appliance is hot when in use.
OPERATING INSTRUCTIONS Read all instructions and warning prior to operating the appliance. Ensure that all controls are in the “OFF” status before plugging the appliance into a properly grounded electrical outlet. This appliance is for use on 120 Volts. The appliance has a 3-prong grounded plug (Figure 1.A). If your electrical outlet has only 2 slots (Figure 1.B), you will have to use an adapter (Figure 1.C) to convert from the 3-prong power cord to a 2-slot receptacle.
OPERATING INSTRUCTIONS Using the Control Panel: (Locate in Figure 3 & Figure 4) E. UP B. FLAME A. POWER F. DOWN C. HEATER D. TIMER G. DISPLAY SCREEN Figure 3 Main Switch (Figure 3.A): ✦ The POWER button supplies power to all the features of the fireplace. This button must be ON for any of the features to work properly. ✦ Once turn ON, digital area shows room temperature, activates the flame and amber light flickering.
OPERATING INSTRUCTIONS Using the Control Panel: (Locate in Figure 5) E. UP B. FLAME A. POWER F. DOWN C. HEATER D. TIMER G. DISPLAY SCREEN Figure 3 Heater Control (Figure 3.C): ✦ Press once to activate high heat setting. Press second time to shut the heat off. ✦ Once heating is on, default temp is 80 °F showed on digital area. Long press the button 6s can transfer °F to °C. ✦ There are 7 ranges which are 90°F, 85°F, 80°F,75°F, 70°F, 65°F, 60°F, press Turn up or Turn down for choosing.
OPERATING INSTRUCTIONS This fireplace includes a Remote Control. See below for directions to use the Remote Control: A POWER F UP E DOWN C HEATER B FLAME D TIMER CHILD LOCK Figure 4 Using the Control Panel: (Locate in Figure 4) Buttons on the Remote Control (Figure 4) have the same functions as those on the Control Panel except Heater, Child Lock and the transformation between the Fahrenheit and Centigrade. CHILD LOCK button (Figure 4.
MAINTENANCE WARNING: Before attempting to perform any maintenance on this appliance, turn all controls to the “OFF” position and then unplug. Allow the appliance to be “OFF” for at least 10 minutes before performing any maintenance in order to allow all components to cool properly. Cleaning: 1. Use a clean dry cloth to clean the fireplace. 2. To remove fingerprints or other marks from glass window, use clean damp cloth. Do not spray glass cleaner or other liquids directly onto the window. 3.
TROUBLE SHOOTING WARNING: Turn off the appliance, unplug and let cool for at least 10 minutes before attempting to service. Only a qualified professional should attempt to service or repair the appliance. PROBLEM Simulated Flame Effect is dim or not present POSSIBLE CAUSE 1. Dimmer control button is set too low. 1. Push flame button to increase light. 2. LED strip not functioning. 2. 3. “Flame wand” has come loose from bracket. Contact customer service center at toll-free no. 3.