User Manual

RF26X Data Sheet Document Number 430141-01A Page 8 of 14
1.4 Mechanical Drawings
These drawings in Figure 1.1 show the RF26X module mechanical specifications.
Figure 1.1 Mechanical drawings of the RF26X Module
1.5 Board Mounting Considerations
The RF26X module is designed to mount into a receptacle (socket) on the host board.
Picture 1.1 shows an RF26X module plugged in to an example host board. The
receptacle sockets are on standard 2mm centers. Suggested receptacles to be used on
the host are:
1)
Thru-hole receptacle
Samtec
MMS-110-01-L-SV
2)
Surface mount receptacle
Samtec
MMS-110-02-L-SV