User Manual

SNAP Stick User Guide 5
Declaration of Conformity
(In accordance with FCC 96-208 and 95-19)
Manufacturer’s Name: Synapse Wireless, Inc.
Headquarters: 500 Discovery Drive
Huntsville, Al 35806
Synapse Wireless, Inc. declares that the products:
Product Name Model Number
SNAP Stick USB SS200-001
To which this declaration relates, meet the requirements specified by the Federal Communications
Commission as detailed in the following specifications:
 Part 15, Subpart B, for Class B equipment
 FCC 96-208 as it applies to Class B personal computers and peripherals
The products listed above have been tested at an External Test Laboratory certified per FCC rules and has
been found to meet the FCC, Part 15, Emission Limits. Documentation is on file and available from
Synapse Wireless, Inc.
Industry Canada (IC) certifications
This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus set
out in the Radio Interference Regulations of the Canadian Department of Communications.
Le present appareil numerique n’emet pas de bruits radioelectriques depassant les limites applicables aux
appareils numeriques de la class B prescrites dans le Règlement sur le brouillage radioelectrique edicte par
le ministère des Communications du Canada.
Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and
maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio
interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically
radiated power (e.i.r.p.) is not more than that necessary for successful communication.
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the
following two conditions: (1) this device may not cause interference, and (2) this device must accept any
interference, including interference that may cause undesired operation of the device.