User's Manual

batteries from the device prior to working on the SynapNet
Node. These will be provided preassembled by SynapSense.
Consult the guide provided with the sensor interface device for
specific instructions on mounting the external temperature
sensors.
NOTE: Use of the equipment with any sensor interface device
cable other than the one provided is prohibited. Use of
unauthorized equipment may void the warrantee and void the
regulatory certification of the equipment.
Troubleshooting and Diagnostics:
1. No lights appear when batteries are inserted
Please be sure the battery orientation is correct and that
the batteries are fresh and charged.
2. A solid red light appears
The battery on the device has fallen below allowable
operating level and the device has suspended its self to
prevent network problems.
3. The red light flashes briefly every 5 seconds
The node is currently not associated with an active
wireless sensor network. Make sure the node is in range
of either an active gateway device or another network-
associated SynapNet Node. A node may take up to 20
minutes to fully join an existing network.
Nodes may fall out of an active network if their signal
strength is weak. Consider topology changes such as the