business use Massage Chair Product Name : Kurodo Category: machinery and appliances general designation: business use electric massage chair User manual Refer to 10〜17 pages how to assemble each parts on the massage chair. 5009444 ●Thank you very much for purchasing Fujiiryoki massage chair. ●Carefully read this operation manual before use and only use as directed. ●Please read the safety precautions on pages 3-7 before use.
3-7 8 9 10-17 18-19 20-21 22-25 26-28 29 30 31 32-33 34-35 36-38 39 40-41 42-43 44-45 46 2
Pillow Turn back the pillow pad during massage Back pad Slowly lean against the back pad Remote control stand Power switch Turn the power switch OFF after use Backrest Massage whole the back area of the body Shoulder Air massage for shoulder Arm Air massage for arm Waist/Buttocks (Pelvis) Air massage for waist, buttocks, around thigh Footrest Air massage for calf, feet 8
4 Rolling section Part insentive massage It does not work even if it is pressed.
Setup and assembling Setup and assembling Armrest / Arm unit fixing screw 14 screws 10
Setup and assembling 12
Connect the Arm unit hose (gray/black/yellow) matching with color of whole hose. ①Match the groove of hose from arm unit and projection of hose from main body, then insert it along the groove. Gray ※ If the torsion is Black Yellow Groove Main body side severe, it is removed once and fixed again so that the torsion severity is less Arm unit side Projection ②Lock the both parts while pushing. ※Turn the both parts firmly till the end. Screw the Arm unit.
Setup and assembling 14
● Check if there is no misalign ment in the back of armrest after assembling. Check here and make sure there is no misalignment.
Setup and assembling
Before starting massage every time Check around the chair Check the surroundings without fail Check to make sure that there is nobody, no pet and nothing ahead behind the chair and under the footrest. Switch on the power DANGER Do not use the chair other than on the designated voltage. Fire or electrification may occur. Insert the power plug firmly so that no dust is accumulated. Failed to do so may cause electric shock, short circuit, or ignition. Do not use damaged power plug or power cord.
Check the main body Check for torn on the cover cloth. DANGER Before use, hold the back pad and make sure that there is no tear on the cover cloth of the backrest and on the other parts. (Should there be any tear, no matter how small it is, discontinue using the chair immediately. Disconnect the power cord plug, and ask for repair.) Continued use with the torn cloth may cause electric shock or any hazard on the body. Check for trapping of foreign substance to the main body.
Adjust the reclining and footrest angle DANGER Check to make sure that there is nobody, no pet and nothing ahead around the chair (back, front, side, and bottom part of main body) when reclined or footrest is moved. Failed to do so may cause accident or injury or damage of house holding. When reclined or footrest is moved, make sure not to insert the hand, finger, leg or head in the gaps of main body which are mentioned below. ● Bottom side of chair ● Gap of armrest, backrest, and seat.
WARNING Do not place your leg or hand in the footrest adjustable place, when footrest is adjusted. It may cause accident or injury. Do not attempt to ride on the front portion of footrest or seat pad at the time of reclination. The chair may overturn and the user may fall down and hurt himself/herself. Do not get on and off the chair at the time of reclining or when the footrest is raised. The chair may overturn and the user may fall down and hurt himself/herself.
Whole body course will start when press Press button. button . Sensing(Body detection) begins. Refer to the page 23 [3. About sensing] for the details. (P.23) After sensing, whole body course begins and lamps of "ROLLER POSITION", "ROLLER STRENGTH", "UPPER/LOWER AIR" light up. Refer to the page 31 [For adjusting your favorite massage] to change the setting during the auto course. (P.31) Selected button lights up and massage begins. Auto course can not be changed during the sensing.
About sensing What is double sensing function? (“Sensing” ) This is the function that detect body shape and posture before starting auto course. 2 sensor functions gives effective massage with 『S shape line detecting system』 which detects the body shape and『Shoulder position detecting system』 which detects the shoulder position. knead ball S shape line Shoulder position detecting system detecting system lean back deeply to the backrest and put the head on the backrest while detection.
Adjust the air strength massage program air massage Display for Strength of lamp lights of lamp strength 9 levels (Massage) 5 levels (Air) weak ● The strength of 9 levels for massage program and 5 levels for air massage are selectable. ● The default is set as 「5」 on massage program and 「3」 (middle level) on air massage. ● Selected strength lamp lights on. ● The strength does not change when maximum or minimum strength is set in massage program.
Press button while selecting the auto course. Each auto course change to EX-MODE course. EX-MODE can not be set during sensing. Select EX-MODE after the sensing is finished. EX-MODE is canceled by pressing button again.
Whole body course will start when press Press button. button . Sensing(Body detection) begins. Refer to the page 23 [3. About sensing] for the details. (P.23) After sensing, whole body course begins and lamps of "ROLLER POSITION", "ROLLER STRENGTH", "UPPER/LOWER AIR" light up. Refer to the page 31 [For adjusting your favorite massage] to change the setting during the auto course. (P.
36 27
Whole body course will start when press Press button. button . Sensing(Body detection) begins. Refer to the page 23 [3. About sensing] for the details. (P.23) After sensing, whole body course begins and lamps of "ROLLER POSITION", "ROLLER STRENGTH", "UPPER/LOWER AIR" light up. Refer to the page 31 [For adjusting your favorite massage] to change the setting during the auto course. (P.31) Press button and massage stops. Select [WHOLE or PART] by pressing Selected lamp lights up.
Whole body course will start when press Press button. button . Sensing(Body detection) begins. Refer to the page 23 [3. About sensing] for the details. (P.23) After sensing, whole body course begins and lamps of "ROLLER POSITION", "ROLLER STRENGTH", "UPPER/LOWER AIR" light up. Refer to the page 31 [For adjusting your favorite massage] to change the setting during the auto course. (P.31) Press button and massage stops. Press to select a favorite air massage.
Parts intensive massage Start to part intensive massage Whole body course will start when press Press button. button . Sensing(Body detection) begins. Refer to the page 23 [3. About sensing] for the details. (P.23) After sensing, whole body course begins and lamps of "ROLLER POSITION", "ROLLER STRENGTH", "UPPER/LOWER AIR" light up. Refer to the page 31 [For adjusting your favorite massage] to change the setting during the auto course. (P.31) Press or and massage stops.
There are unadjustable program depending on massage type. Refer to the page of “Basic techniques of Massage” for details. Adjust by using button. Knead ball position is adjustable when moving range of massage program is set as「Part」 or「Point」 .
4 Slowest Hand knead HAND KNEAD 32
There are unadjustable program depending on massage type. Refer to the page of “Basic techniques of Massage” for details.
Image of air supply Comfortable amount of air supply (Strength) Firm massage is available by shifting the speed of air massage.
Mecha massage function list table The list of adjustments that can be performed during each knead technique.
● Pressing button resets remaining time, pressing button keeps remaining time. Massage operation stops once when press the manual program button to change it from auto course. When changing from auto course, press one of buttons and massage stops once. Then, press favorite massage button to start. Change to only air massage/only rolling Press button and massage stops. Select your favorite air massage or rolling.
Maintenance and storage How to maintain the chair DANGER Do not connect or disconnect the power plug by wet hands. Electrification may occur. WARNING Make sure to unplug the power plug. Electrification may occur. Do not wipe with benzine, paint thinner or alcohol. This may cause fire or electrification. Cloth/Back pad/Pillow Instill water containing neutral detergent and squeeze firmly. Wipe the dirty part with the cloth. Wipe it out with a tight squeezed cloth which is water contained.
How to move the main unit WARNING Do not move the chair while people or items are on the chair. Damage or injuries may occur. Do not haul the chair itself or move with the casters on the floor where it easily gets scratches. Do not pull the power chord or remote control chord with leg or wrap with caster. Failure to do so may cause injury. When moving with Caster Float the front side of the main unit, push it and move. ● While lowering the main unit, lower slowly so that the leg part does not get hit.
Q&A Left and right strength is different. And, I feel the difference is remarkable. To massage for a better feeling, in connection with adopting a mechanism in which the rubbing will mutually hit, unavoidably, the operation might take place in the knead ball slipped position. Thereby, you feel that there is a difference among the left and right strength. But it is not a failure. Rubbing ball slippage Is it ok to spread the hot carpet under the chair? As there is a danger of flame, please stop.
During massage, some creaky noises are made. Is it ok? Is it possible to completely cut off the air massage in the auto course? There is nothing abnormal in the structure. Refer to "Trouble shooting" . It is possible in the course other than stretch course and ex-mode stretch course. Please refer to "Adjustment method during air massage". Explain the dimensions of the main unit. Please refer to the following diagram. Front view Side view When it is not reclined Height Approx. 1220mm Height Approx.
Troubleshooting DANGER Do not remodel and also do not analysis or repair by yourself, there are chances of injury due to fire (or) abnormal operation You may encounter the following phenomena while in massage. As being due to the mechanical design, they have nothing to do with the product life.
Checkpoints WARNING When using the chair after a while, read the user manual once again, check to make sure that it operates normally to use again. Failing which may cause injury or accident.
Specifications Kurodo 9 9 Air massage strength adjustment range UPPER : 5-step adjustment (Shoulder,Arm,Waist/Buttocks) LOWER : 5-step adjustment (Leg) Approx.
Kurodo 20180426(1)