Data Sheet Module name:IA9QH5 S83D-F Version 0.1 Feb. 27, 2019 Syncomm Technology Corp. 10F., No. 101, Sec. 2, Gongdao 5th Rd., East Dist., Hsinchu City, Taiwan, R.O.C. Tel: +886-3-5169188 Fax: +886-3-5169111 http://www.syncomm.com.tw SYNCOMM Confidential E-Mail: sell@syncomm.com.tw Web site: Http://www.syncomm.com.
1. 2. 3. 4. 5. 6. 7. 8. INDEX Features....................................................................................................................................................3 Application.............................................................................................................................................. 3 RF Specification......................................................................................................................................
IA9QH5 S83D-F MODULE page - 3 - 1. Features 5.2GHz/5.8GHz ISM Band GFSK modulation Low BOM cost Long distance > 30m (Line of sight) Support 1-1 duplex mode or 1-N broadcasting mode Digital I2S audio interface Support no audio detection function Support compression/un-compression mode Antenna diversity Short delay time variation Audio format 16/24bit , 32/44.
IA9QH5 S83D-F MODULE page - 4 - 3. RF Specification Item Min Typ Max Unit Channel Range 5160 ─ 5240 MHz ─ 2.7 ─ MHz 2M Mode dBm Peak power at Antenna port dBm The smaller, the better -20dB bandwidth RF Output Power Sensitivity 12 -91 ─ ─ Note Table 1 5.
IA9QH5 S83D-F MODULE page - 5 - Power On Reset Characteristics Symbol Trst Parameter Min Typ 10 Max Unit mS Table 5 Fig 4.1 Reset Timing Chart SYNCOMM Confidential E-Mail: sell@syncomm.com.tw Web site: Http://www.syncomm.com.
IA9QH5 S83D-F MODULE page - 6 - 5. Mechanical Specification 5.1 No Shielding Case Dimension:20 * 40 * 6.7 mm PCB 4 Layers Mechanical Drawing: Fig 5.1 Mechanical Drawing of S83D-F Module Propose 1.27mm Female Header size:H:4.3±0.15mm W:3.0±0.15mm SYNCOMM Confidential E-Mail: sell@syncomm.com.tw Web site: Http://www.syncomm.com.
IA9QH5 S83D-F MODULE page - 7 - 5.2 With Shielding Case Dimension:20 * 40 * 8.7 mm PCB 4 Layers Mechanical Drawing: Fig 5.2 Mechanical Drawing of S83D-F Module with shielding case Propose 1.27mm Female Header size:H:4.3±0.15mm W:3.0±0.15mm SYNCOMM Confidential E-Mail: sell@syncomm.com.tw Web site: Http://www.syncomm.com.
IA9QH5 S83D-F MODULE page - 8 - 6. Interface Fig 7.1 Pin sequence of S83D-F Module (Bottom View) Pin Name 1 VCCIO 2 DGND 3 SPB_I2S_MCLK 4 5 6 7 GPIO 32 GPIO 14 GPIO 13 GPIO 17 8 GPIO 26 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 I2C_CLK I2C_DATA DGND DGND GPIO 27 GPIO 21 GPIO 16 GPIO 0 M_RESET(PORN) I2C_CLK I2C_DATA GPIO 30 SPA_I2S_DATA SPB_I2S_LRCK DGND SPB_I2S_BCK GPIO 15 SPB_I2S_DATA Note : (1) 7. I/O TX Function Define RX Function Define P DC 3.0 ~ 3.6V IN DC 3.0 ~ 3.
FCC Statement 15.19 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. 15.21 Note: The grantee is not responsible for any changes or modifications not expressly approved by the party responsible for compliance. Such modifications could void the user’s authority to operate the equipment.
Regulatory Module Integration Instructions This module has been granted modular approval for mobile applications. OEM integrators for host products may use the module in their final products without additional FCC/ISED (Innovation, Science and Economic Development Canada) certification if they meet the following conditions. Otherwise, Additional FCC/IC approvals must be obtained. ⚫ ⚫ ⚫ ⚫ ⚫ ⚫ ⚫ The OEM must comply with the FCC labeling requirements.
IC Statement This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.