Setup Manual

The Back of the Gateway

1. USB OTG Port (Mirco USB)

2. Power adapter port

3. Soft reboot button

4. Antenna port

5. Ethernet port

Preparing your Gateway

for Setup

1. Carefully screw in the provided 3dbi antenna (See Figure 3).

2. Find a suitable location for your Gateway (for optimal coverage we recommend placing

the unit near a window and close to a power source).

3. If you are using ethernet connection, locate the ethernet port on the back of your gateway

and securely insert ethernet cable. (See Figure 4)

4. Power the gateway with the included power adapter.

5. Allow the unit a few seconds to power on. LED strip should begin blinking white.

gure 3 gure 4

Gateway Setup Manual