Owner's manual

SYNERGY MFG. 870 INDUSTRIAL WAY, SAN LUIS OBISPO, CA [phone]
PPM-4012 JK SPARE TIRE RELOCATION BRACKET
Version 1
GENERAL NOTES:
• The Synergy JK spare tire relocation bracket will move the tire up 1” and away
from the tail gate 1 1/4”, this is necessary when using a larger spare tire or using
less offset wheels than stock.
• The 3
rd
brake light may be obstructed since the tire is move up and a larger spare
tire is often used
1. Remove the spare tire
2. Position the new spare tire relocation bracket over the 3 studs that attach the spare
tire. Using the supplied nylock nuts and washers, secure the spare tire relocation
bracket, torque the nuts to 75 ft-lbs
3. Mount the spare tire to the spare tire relocation bracket using the original lug nuts;
torque the lug nuts to 75 ft-lbs.
4. If you are using different lug nuts than stock or a wheel lock nut, make sure that the
stud does not bottom out in the nut.