Datasheet

The information on this data sheet is based on the information provided by our supplier. They are being offered for service purposes

and addressed to experts who use those to their own discretion and at their own risk. We do not guarantee results or take over

liabilities for the indicated specifications or results obtained based on the specifications.

Stand 01/06

EXTRUDED SLEEVING M

Description

Extruded PVC sleeving to DIN 40 621

Properties

Class Y (90 °C), short term resistant to higher tempera-

tures possible, low temperature resistant to -20 °C.

Special quality 105 °C.

Colours

Transparent, black, white, red, green, yellow, blue, brown,

grey, pink, violett, orange.

Make-up

Coils

Properties

Material:

E-PVC

Shore Hardness:

75 - 85

Continuity Resistance:

min. 10

Ohm x cm

Dielectric Strength:

1 kV per 0.1 mm wall thickness

Wall Thickness:

0.40 mm up to 3.0 mm, depending on internal diameter

Diameter Range:

0.5 mm up to 20.0 mm

ROHS conformity 2002/ 95/ EC yes

SLEEVINGS

3 1