User's Manual

Synology DiskStation User's Guide
Based on DSM 3.0
164 Chapter 16: Perform Advanced Management Tasks
 Time: You can see the time setting of your Synology DiskStation here, including time server and time zone.
To set up your time server, see "Set Up Time" on Page 31.
 Hard disk(s): You can see the model name, temperature, disk size, and disk status of your
Synology DiskStation here.
Check Storage Information
You can check the free or used space of your DiskStation volumes and check the status of the hard disks.
To check volume usage:
From the pie charts, you can see the free or used space of DiskStation volumes.
The hard drive status might be any of the following:
 Normal: System partition and volume are available for use on the hard drive.
 Initialized: System partition is established, but no volume has been created.
 Not Initialized: System partition and volume are not established on the hard drive.
 No Disk Installed: No disk is installed in the corresponding hard drive slot.
 System Partition Failed: System partition on the hard drive is unavailable. We recommend that you replace
the hard drive.
 Crashed: Failed to access volume on the hard drive. We recommend that you replace the hard drive.
Note: For the system to function normally, there should be at least one disk in Normal or Initialized status.