Synology DiskStation DS114 Quick Installation Guide Synology_QIG_DS114_20130716
Table of Contents Chapter 1: Before You Start Package Contents .............................................................................................................................................................. 3 Synology DiskStation at a Glance .................................................................................................................................... 4 Safety Instructions ..................................................................................................
Chapter Chapter 1: 1 Before You Start Before you start setting up DiskStation, please check the package contents to verify that you have received the items below. Please also read the safety instructions carefully before use to prevent your DiskStation from any damages.
Synology DiskStation at a Glance No. Name Location Description 1) LED Indicators Front Panel The LED indicator is used to display the status of the internal disk and the system. For more information, see "Appendix B: LED Indication Table" on Page 11. 2) Power Button Front Panel 3) Fan Back Panel The fan is built to exhaust waste heat out of Synology DiskStation. If the fan is malfunctioning, the system will beep every few seconds.
Safety Instructions Keep away from direct sunlight and away from chemicals. Make sure the environment does not experience abrupt changes in temperature or humidity. Do not place the Synology product close to any liquid. Before cleaning, unplug the power cord first. Wipe Synology product with damp paper towels. Do not use chemical or aerosol cleaners to clean it. Do not place the Synology product on a cart, table, or desk, which is not stable to avoid the product from falling over.
Chapter Chapter 2: Hardware Setup Tools and Parts for Hard Disk Installation A screwdriver A 3.5" or 2.5" SATA hard disk (Please visit www.synology.com for compatible hard disk models.) Warning: If you install a hard disk that contains data, the system will format the hard disk and erase all data. If you need the data in the future, please back it up before installation. Install Hard Disks 1 Push the upper case in the direction as shown below. Lift the upper case and set it aside.
b Slide the 2.5" Disk Holder into the hard drive bay, and push it all the way until the hard disk is connected to the SATA connector. Secure the Disk Holder with the provided screws. 3 Replace the upper case, and tighten the screws on the back panel. Start up your DiskStation 1 Connect the AC adapter to the power port of DiskStation. Connect one end of the AC power cord to the AC power adapter, and the other to the power outlet. 2 Use the LAN cable to connect DiskStation to your switch/router/hub.
Chapter Chapter 3: Install DSM on DiskStation Once the hardware is ready, your DiskStation requires DiskStation Manager (DSM) – the operating system specifically designed for Synology DiskStations – to start working. We highly recommend using Synology’s online Web Assistant for installing DSM from the web browser. Synology Web Assistant automatically downloads the latest available software updates from the Internet and guides you through the installation.
4 Click Connect to start the setup process. Follow onscreen instructions to complete the setup process. Note: 1. Suggested browsers: Chrome, Firefox. 2. Both the DiskStation and the computer should be in the same local network. 3. Internet connection must be available during DSM installation with Web Assistant. Learn More Congratulations! Your DiskStation is set up now. Refer to the User’s Guide in the installation disc for advanced settings and management.
Appendix A Specifications AppendixA: Item DS114 Internal HDD 3.5" or 2.5" SATA(II) X 1 Max. Capacity 4TB (1 X 4TB HDD) External HDD Interface ‧USB 3.0 x 2 ‧eSATA x 1 LAN Port Gigabit x 1 Size (HxWxD) (mm) 166 X 71 X 224 Weight (Kg) 0.705 Supported Clients ‧Mac OS X 10.5 onward ‧Windows XP onward ‧Ubuntu 9.04 onward Max. User Accounts 2048 Max. Group Accounts 256 Max. Shared Folders 256 Max.
Appendix B LED Indication Table AppendixB: LED Indication Color Status Description Green Static Volume normal Static STATUS Orange Blinking Off LAN Green Green Blinking Network is active No network Off Disk is being accessed No internal disk or disk idle Blinking Off No internal disk Gigabit Link Blinking Blue Volume degraded or crashed Static Static Power Available volume space < 1 % HDD hibernation Off DISK Available volume space < 1GB Power ready Booting up Shutting down P
SYNOLOGY, INC. END USER LICENSE AGREEMENT IMPORTANT–READ CAREFULLY: THIS END USER LICENSE AGREEMENT ("EULA") IS A LEGAL AGREEMENT BETWEEN YOU (EITHER AN INDIVIDUAL OR A SINGLE ENTITY) AND SYNOLOGY, INC. AND ITS AFFILIATES, INCLUDING SYNOLOGY AMERICAN CORP AND SYNOLOGY UK LTD., (COLLECTIVELY, "SYNOLOGY") FOR ANY SYNOLOGY SOFTWARE, TOGETHER WITH ANY OTHER ASSOCIATED FIRMWARE, MEDIA, PRINTED MATERIALS AND "ONLINE" OR ELECTRONIC DOCUMENTATION (COLLECTIVELY, THE "SOFTWARE") AVAILABLE FOR DOWNLOAD AT WWW.
INABILITY TO USE THE SOFTWARE OR OTHERWISE UNDER OR IN CONNECTION WITH THIS EULA OR THE SOFTWARE, WHETHER BASED ON CONTRACT, TORT (INCLUDING NEGLIGENCE), STRICT LIABILITY OR OTHER THEORY EVEN IF SYNOLOGY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Section 13. Limitation of Liability.
SYNOLOGY, INC. LIMITED PRODUCT WARRANTY THIS LIMITED WARRANTY ("WARRANTY") APPLIES TO THE PRODUCTS (AS DEFINED BELOW) OF SYNOLOGY, INC. AND ITS AFFILIATES, INCLUDING SYNOLOGY AMERICA CORP AND SYNOLOGY UK LTD., (COLLECTIVELY, "SYNOLOGY"). YOU ACCEPT AND AGREE TO BE BOUND BY THE TERMS OF THIS WARRANTY BY OPENING THE PACKAGE CONTAINING AND/OR USING THE PRODUCT. IF YOU DO NOT AGREE TO THE TERMS OF THIS WARRANTY, DO NOT USE THE PRODUCT.
Customer, whichever period is longer Any Product found by Synology to be non-defective will be returned to Customer. 2.6 Support. During the Warranty Period, Synology will make available to Customer the support services. Following the expiration of the applicable Warranty Period, support for Products may be available from Synology upon written request. 2.7 Exclusions.
or the relationship between Customers residing within the United States and Synology will be resolved exclusively and finally by arbitration under the current commercial rules of the American Arbitration Association, except as otherwise provided below. The arbitration will be conducted before a single arbitrator, and will be limited solely to the dispute between Customer and Synology.
