Synology NAS DS1621xs+ Hardware Installation Guide
Table of Contents Chapter 1: Before You Start Package Contents Synology DS1621xs+ at a Glance LED Indicator Table Hardware Specification Optional Accessories Spare Parts Safety Instructions 3 4 5 6 7 8 9 Chapter 2: Hardware Setup Tools and Parts for Component Installation Install Drives Start Up Your Synology NAS Add a Memory Module to Synology NAS Add an M.
1 Chapter Before You Start Thank you for purchasing this Synology product! Before setting up your new Synology NAS, please check the package contents to verify that you have received the items below. Also, make sure to read the safety instructions carefully to avoid harming yourself or damaging your Synology NAS. Note: All images below are for illustrative purposes only, and may differ from the actual product.
Synology DS1621xs+ at a Glance 1 2 3 5 4 6 1 4 7 Location 8 12 9 11 10 13 14 15 16 17 No. Article Name Description 1 Status Indicator Displays the status of the system. For more information, see "LED Indicator Table". 2 Alert Indicator Displays warnings regarding fan or temperature. For more information, see "LED Indicator Table". 3 Power Button 4 LAN Indicator 5 Drive Status Indicator 6 Drive Tray 7 USB 3.0 Port 8 Drive Tray Lock Lock or unlock drive trays.
LED Indicator Table LED Indicator Color Status Description Green Static Volume normal Volume degraded/Volume crashed STATUS Orange Blinking Volume not created DSM not installed Off Green Disk Status Indicator (on tray) Orange HDD hibernation Static Drive ready and idle Blinking Accessing drive Static Drive error/Port disabled1 Off Blue Power No internal drive Static Powered on Blinking Booting up/Shutting down Off ALERT Orange Powered off Blinking Off Green Front LAN System nor
Hardware Specification Item DS1621xs+ Compatible Drive Type • 3.5"/2.5" SATA x 6 • M.2 2280 NVMe SSD x 2 Maximum Internal Raw Capacity • 96 TB (6 x 16 TB HDD) • 256 TB with 2 x DX517 (expansion unit) External Port • USB 3.0 x 3 • eSATA x 2 LAN Port • 1GbE (RJ-45) x 2 • 10GBase-T (RJ-45) x 1 PCIe Slot Gen3 x8 slot (x8 link) x 1 Size (H x W x D) (mm) 166 x 282 x 243 Weight (kg) 5.3 Supported Client • Windows 7 onwards • macOS 10.
Optional Accessories With Synology accessories, you can customize your Synology NAS to fit different business environments without worrying about compatibility and stability. Visit www.synology.com/compatibility for more information.
Spare Parts Visit www.synology.com/products/spare_parts if you need to replace system fans, disk trays, or power supply units. Model Name 8 Picture Description Disk Tray (Type D6) 3.5"/2.
Safety Instructions Keep away from direct sunlight and from chemicals. Make sure the environment does not experience abrupt changes in temperature or humidity. Place the product right side up at all times. Do not place near any liquids. Before cleaning, unplug the power cord. Wipe with damp paper towels. Do not use chemical or aerosol cleaners. To prevent the unit from falling over, do not place on carts or any unstable surfaces. The power cord must plug in to the correct supply voltage.
2 Chapter Hardware Setup Tools and Parts for Component Installation Please prepare the following tools and parts before setting up your Synology NAS: • A screwdriver (only for 2.5" drives) • At least one 3.5" or 2.5" SATA drive (please visit www.synology.com/compatibility for compatible drive models) Warning: If you install a drive that contains data, the system will format the drive and erase all existing data. Please back up any important data before installation.
• For 2.5" drives: Remove the fastening panels from the sides of the drive tray and store them in a safe place. Place the drive in the area of the drive tray indicated by a blue rectangle below. Turn the tray upside down and tighten the screws to secure the drive in place. 4 Insert the loaded hard drive tray into the empty hard drive bay and push it into position by the upper half of the handle. Note: Make sure that the drive tray is completely inserted. Otherwise, the drive might not function properly.
7 Repeat the steps above to install the other drives you have prepared. 8 Drives are numbered as shown below. 1 2 3 4 5 6 Note: If you plan to create a RAID volume, we recommend installing drives of identical size to make the best use of drive capacity. Start Up Your Synology NAS 1 Use the LAN cable to connect the Synology NAS to your switch, router, or hub. 2 Connect one end of the AC power cord to the power port of your Synology NAS. Connect the other end to a power outlet.
Add a Memory Module to Synology NAS Optional Synology memory modules are designed to expand the memory of your Synology NAS. Follow the steps below to install, check, or remove a memory module on your Synology NAS. The following table shows the memory configuration for best practice: A0 8 GB 16 GB B0 8 GB 16 GB Total Memory 16 GB 32 GB To install the memory module 1 Shut down your Synology NAS. Disconnect all cables from your Synology NAS to prevent possible damage.
To make sure your Synology NAS recognizes the new memory capacity 1 Install DiskStation Manager (DSM). Please see "Install DSM on Synology NAS" for more information. 2 Sign in to DSM as admin or a user belonging to the administrators group. 3 Go to Control Panel > Info Center and check Total Physical Memory. If your Synology NAS does not recognize the memory or does not start up successfully, please make sure that the memory module is installed correctly.
Add an M.2 NVMe SSD to Synology NAS You can install up to two M.2 NVMe 2280 SSDs on your Synology NAS to create an SSD cache volume. Follow the steps below for SSD module installation and removal. To install an M.2 NVMe SSD module 1 Shut down your Synology NAS. Disconnect all cables from your Synology NAS to prevent possible damage. 2 Remove the hard drive trays from the drive bays. You will see two empty SSD slots located on the inner left side of your Synology NAS. 3 SSD slots are numbered as shown below.
3 Chapter System Maintenance Replace System Fan If the cooling fan located on the back of the Synology NAS malfunctions, please follow the steps below to remove the malfunctioning fan and replace it with a new one. 1 Power off your Synology NAS and remove the power cord. 2 Fans are numbered as shown below: 1 2 3 Remove the four screws that secure the fan panel. 4 Remove the malfunctioning fan: a Pull out the fan panel from your Synology NAS.
c Remove the screws that secure the fan from the fan case. d Remove the screws that secure the fan guard from the malfunctioning fan. 5 Install a new fan: a Attach the fan guard to the new fan, then tighten the screws to secure the fan guard.
b Attach the fan case (with the fan cable within the fan pointing at the bottom-right corner) to the new fan, then tighten the screws to secure the fan case. c Plug the fan cables into your Synology NAS as shown below. 6 Replace and tighten the four screws removed in step 3.
Initial Troubleshooting Guide We have selected several helpful articles on frequently asked questions to help you perform initial troubleshooting on your Synology NAS.
4 Chapter Install DSM on Synology NAS After hardware setup is completed, please install DiskStation Manager (DSM) – Synology's browser-based operating system – on your DS1621xs+. Install DSM with Web Assistant Your DS1621xs+ comes with a built-in tool called Web Assistant that helps you download the latest version of DSM from the Internet and install it on your DS1621xs+. To use Web Assistant, please follow the steps below. 1 Power on your DS1621xs+.
SYNOLOGY, INC. END USER LICENSE AGREEMENT IMPORTANT–READ CAREFULLY: THIS END USER LICENSE AGREEMENT ("EULA") IS A LEGAL AGREEMENT BETWEEN YOU (EITHER AN INDIVIDUAL OR A LEGAL ENTITY) AND SYNOLOGY, INC. ("SYNOLOGY") FOR THE SYNOLOGY SOFTWARE INSTALLED ONTO THE SYNOLOGY PRODUCT PURCHASED BY YOU (THE "PRODUCT"), OR LEGALLY DOWNLOADED FROM WWW.SYNOLOGY.COM, OR ANY OTHER CHANNEL PROVIDED BY SYNOLOGY ( "SOFTWARE").
request. Section 11. Disclaimer of Warranties. EXCEPT AS EXPRESSLY SET FORTH ABOVE, THE SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS. SYNOLOGY AND ITS SUPPLIERS HEREBY DISCLAIM ALL OTHER WARRANTIES, EXPRESS, IMPLIED OR STATUTORY, ARISING BY LAW OR OTHERWISE, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR USE, TITLE AND NONINFRINGEMENT, WITH REGARD TO THE SOFTWARE.
SYNOLOGY, INC. LIMITED PRODUCT WARRANTY THIS LIMITED WARRANTY ("WARRANTY") APPLIES TO THE PRODUCTS (AS DEFINED BELOW) OF SYNOLOGY, INC. AND ITS AFFILIATES, INCLUDING SYNOLOGY AMERICA CORP, (COLLECTIVELY, "SYNOLOGY"). YOU ACCEPT AND AGREE TO BE BOUND BY THE TERMS OF THIS WARRANTY BY OPENING THE PACKAGE CONTAINING AND/OR USING THE PRODUCT.
workmanship; (e) serial number has been removed or defaced from Product, resulting in not able to identify; (f) has been damaged or out of order because Customer fails to implement any correction, modification, enhancement, improvement or other update made available to Customer by Synology, or because Customer implements, installs or uses any correction, modification, enhancement, improvement or other update made available by any third party; (g) has been damaged, out-oforder, or incompatible due to install
PROFIT OR BUSINESS) ARISING OUT OF OR RELATING TO THE USE OR INABILITY TO USE THE PRODUCT, ANY ACCOMPANYING DOCUMENTATION OR SOFTWARE AND ANY OTHER GOODS OR SERVICES PROVIDED UNDER THIS WARRANTY, WHETHER BASED ON CONTRACT, TORT (INCLUDING NEGLIGENCE), STRICT LIABILITY OR OTHER THEORY EVEN IF SYNOLOGY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. 4.3 Limitation of Liability.
this Warranty, the prevailing party will be entitled to recover, in addition to any other relief to which it may be entitled, costs and reasonable attorneys' fees. 5.7 Export Restrictions. You acknowledge that the Product may be subject to U.S. export restrictions. You will comply with all applicable laws and regulations that apply to the Product, including without limitation the U.S. Export Administration Regulations. 5.8 Severability.
FCC Declaration of Conformity This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
この装置は、クラス B 機器です。この装置は、住宅環境で使用することを 目的 としていますが、この装置がラジオやテレビジョン受信機に近接して使 用され ると、受信障害を引き起こすことがあります。 取扱説明書に従って正しい取り扱いをして下さい。 VCCI 一 B
