Synology DiskStation DS215+ Quick Installation Guide
Table of Contents Chapter 1: Before You Start Package Contents Synology DiskStation at a Glance Safety Instructions 3 4 5 Chapter 2: Hardware Setup Tools and Parts for Drive Installation Install Drives Start Up Your DiskStation 6 6 8 Chapter 3: Install DSM on DiskStation Install DSM with Web Assistant Learn More Appendix A: Specifications Appendix B: LED Indicator Table Synology_QIG_DS215+_20150303 2 10 10
Chapter 1 Before You Start Thank you for purchasing this Synology product! Before setting up your new DiskStation, please check the package contents to verify that you have received the items below. Also, make sure to read the safety instructions carefully to avoid harming yourself or damaging your DiskStation. Package Contents Main unit x 1 AC power cord x 1 AC power adapter x 1 Screws for 2.
Synology DiskStation at a Glance 4 No. Article Name Location Description 1 Drive Tray 2 Drive Status Indicator 3 Drive Tray Lock 4 Status Indicator 5 LAN Indicator Displays the status of the network connection. For more information, see "Appendix B: LED Indicator Table". 6 Power Button 1. Press to power on the DiskStation. 2. To power off the DiskStation, press and hold until you hear a beep sound and the Power LED starts blinking.
Safety Instructions Keep away from direct sunlight and away from chemicals. Make sure the environment does not experience abrupt changes in temperature or humidity. Place the product right side up at all times. Do not place near any liquids. Before cleaning, unplug the power cord. Wipe with damp paper towels. Do not use chemical or aerosol cleaners. To prevent the unit from falling over, do not place on carts or any unstable surfaces. The power cord must plug in to the correct supply voltage.
Chapter Hardware Setup Tools and Parts for Drive Installation • A screwdriver (only for 2.5" drives) • At least one 3.5” or 2.5” SATA drive (please visit www.synology.com for compatible drive models) Warning: If you install a drive that contains data, the system will format the drive and erase all existing data. Please back up any important data before installation. Install Drives 1 Press the lower part of the hard drive tray to pop out the handle.
3 Load drives in the drive trays. • For 3.5” drives: Remove the fastening panels from the sides of the drive tray. Place the drive in the drive tray. Then insert the fastening panels to secure the drive in place. • For 2.5” drives: Remove the fastening panels from the sides of the drive tray and store them in a safe place. Place the drive in the blue area (shown below) of the drive tray. Turn the tray upside down and tighten the screws to secure the drive in place.
6 Insert the hard drive tray key into the hard drive tray lock, turn the key clockwise (to the "I" position) to lock the handle of the hard drive tray, and then remove the key. 7 Repeat the steps above to assemble the other drives you have prepared. 8 Drives are numbered as shown below. Note: If you want to create a RAID volume, we recommend that all installed drives are of the same size to make the best use of drive capacity.
2 Connect the AC adapter to the power port of the DiskStation. Connect one end of the AC power cord to the AC power adapter, and the other to the power outlet. 3 Press the power button. Congratulations! Your DiskStation is now online and detectable from a network computer.
Chapter Install DSM on DiskStation After hardware setup is finished, please install DiskStation Manager (DSM) – Synology’s browser-based operating system – on your DiskStation. Install DSM with Web Assistant Your DiskStation comes with a built-in tool called Web Assistant that helps you download the latest version of DSM from the Internet and install it on your DiskStation. To use Web Assistant, please follow the steps below. 1 Power on the DiskStation.
Appendix A Specifications Item DS215+ Compatible Drive Type 3.5"/2.5" SATA3/SATA2 x 2 Maximum Internal Raw Capacity 16TB (2 x 8TB hard drives) External Ports • USB 3.0 x 2 • eSATA x 1 LAN Ports 1GbE (RJ-45) x 2 Size (H x W x D) (mm) 157 x 103.5 x 232 Weight (kg) 1.69 Supported Clients • Mac OS X 10.5 onward • Windows XP onward • Ubuntu 9.
Appendix B LED Indicator Table LED Indicator Color Status Description Green Static Volume normal Volume degraded / Volume crashed STATUS Orange Blinking Volume not created DSM not installed Off Front LAN Green HDD hibernation Static Network connected Blinking Network active Off Rear LAN (on upper side of jack) Green No network Static Network connected Blinking Network active Off Rear LAN (on lower side of jack) No network Green Static Gigabit connection Orange Static 100 Mbp
SYNOLOGY, INC. END USER LICENSE AGREEMENT IMPORTANT–READ CAREFULLY: THIS END USER LICENSE AGREEMENT ("EULA") IS A LEGAL AGREEMENT BETWEEN YOU (EITHER AN INDIVIDUAL OR A LEGAL ENTITY) AND SYNOLOGY, INC. ("SYNOLOGY") FOR THE SYNOLOGY SOFTWARE INSTALLED ONTO THE SYNOLOGY PRODUCT PUCHASED BY YOU (THE “PRODUCT”), OR LEGALLY DOWNLOADED FROM WWW.SYNOLOGY.COM, OR ANY OTHER CHANNEL PROVIDED BY SYNOLOGY ("SOFTWARE").
Section 14. Export Restrictions. You acknowledge that the Software is subject to U.S. export restrictions. You agree to comply with all applicable laws and regulations that apply to the Software, including without limitation the U.S. Export Administration Regulations. Section 18. Dispute Resolution.
SYNOLOGY, INC. LIMITED PRODUCT WARRANTY THIS LIMITED WARRANTY ("WARRANTY") APPLIES TO THE PRODUCTS (AS DEFINED BELOW) OF SYNOLOGY, INC. AND ITS AFFILIATES, INCLUDING SYNOLOGY AMERICA CORP, (COLLECTIVELY, "SYNOLOGY"). YOU ACCEPT AND AGREE TO BE BOUND BY THE TERMS OF THIS WARRANTY BY OPENING THE PACKAGE CONTAINING AND/OR USING THE PRODUCT. IF YOU DO NOT AGREE TO THE TERMS OF THIS WARRANTY, DO NOT USE THE PRODUCT.
the expiration of the applicable Warranty Period, support for Products may be available from Synology upon written request. 2.6 Exclusions.
single arbitrator, and will be limited solely to the dispute between Customer and Synology. The arbitration, or any portion of it, will not be consolidated with any other arbitration and will not be conducted on a class-wide or class action basis. The arbitration shall be held in King County, Washington, U.S.A. by submission of documents, by telephone, online or in person as determined by the arbitrator at the request of the parties.
