Synology DiskStation DS415play Quick Installation Guide Synology_QIG_DS415play_20140505
Table of Contents Chapter 1: Before You Start Package Contents .............................................................................................................................................................. 3 Synology DiskStation at a Glance .................................................................................................................................... 4 Safety Instructions ..................................................................................................
Chapter Chapter 1: 1 Before You Start Thank you for purchasing this Synology product! Before setting up your new DiskStation, please check the package contents to verify that you have received the items below. Also, make sure to read the safety instructions carefully to avoid harming yourself or damaging your DiskStation. Package Contents Main unit x 1 AC power cord x 1 AC power adapter x 1 RJ-45 LAN cable x 1 Screws for 2.
Synology DiskStation at a Glance 4 No. Article Name Location 1) Status Indicator Displays the status of the system. For more information, see "Appendix B: LED Indicator Table". 2) Disk Indicator Displays the status of installed drives. For more information, see "Appendix B: LED Indicator Table". 3) USB 2.0 Port 4) Power Button 5) Fan 6) LAN Port 7) USB 2.0 Port Front Panel Description Connect external hard drives, USB printers, or other USB devices to the DiskStation here. 1.
Safety Instructions Keep away from direct sunlight and from chemicals. Make sure the environment does not experience abrupt changes in temperature or humidity. Place the product right side up at all times. Do not place near any liquids. Before cleaning, unplug the power cord. Wipe with damp paper towels. Do not use chemical or aerosol cleaners. To prevent the unit from falling over, do not place on carts or any unstable surfaces. The power cord must plug in to the correct supply voltage.
Chapter Chapter 2: Hardware Setup Tools and Parts for Drive Installation A screwdriver (only for 2.5 drives) At least one 3.5” or 2.5” SATA drive (please visit www.synology.com for compatible drive models.) Warning: If you install a drive that contains data, the system will format the drive and erase all existing data. Please back up any important data before installation. Install Drives 1 Remove the drive bay cover from the front panel.
For 2.5” drives: Remove the fastening panels from the sides of the drive tray and store them in a safe place. Place the drive in the blue area (shown below) of the drive tray. Turn the tray upside down and tighten the screws to secure the drive in place. 4 Make sure the side marked with "UP" is facing up, and insert the drive tray into the empty drive bay. You should hear a click when the tray is locked into place. 5 If you have prepared a second drive, repeat the steps above to install it.
7 Secure the drive bay cover to the front of the unit. Note: If you want to create a RAID volume, we recommended that all installed drives are of the same size to make the best use of drive capacity. Start Up Your DiskStation 1 Use the LAN cable to connect the DiskStation to your switch, router, or hub. 2 Connect the AC adapter to the power port of the DiskStation. Connect one end of the AC power cord to the AC power adapter, and the other to the power outlet. 3 Press the power button.
Chapter Chapter 3: Install DSM on DiskStation After hardware setup is finished, please install DiskStation Manager (DSM) – Synology’s browser-based operating system – on your DiskStation. Install DSM with Web Assistant Your DiskStation comes with a built-in tool called Web Assistant that helps you download the latest version of DSM from the Internet and install it on your DiskStation. To use Web Assistant, please follow the steps below. 1 Power on the DiskStation.
Appendix A Specifications AppendixA: Item DS415play Internal Drives 3.5" or 2.5" SATA (II) x 4 Max. Capacity 20 TB (4 x 5 TB hard drives) External Device Ports ‧USB 3.0 x 2 ‧USB 2.0 x 3 LAN Port Gigabit x 1 Size (H x W x D) (mm) 165 x 203 x 233.2 Weight (kg) 2.03 Supported Clients ‧Mac OS X 10.5 onward ‧Windows XP onward ‧Ubuntu 9.
Appendix B LED Indicator Table AppendixB: LED Indicator STATUS Color Status Description Green Static Volume normal Static Available volume space < 1GB or < 1 % Orange Blinking Slow on/off cycle Green DISK 1~4 Orange Power Static Drive ready and idle Blinking Accessing drive Static Drive error No internal drive Static Powered on Blinking Booting up or shutting down Off Rear LAN (on upper side of jack) Rear LAN (on lower side of jack) No volume HDD hibernation Off Blue Drive
SYNOLOGY, INC. END USER LICENSE AGREEMENT IMPORTANT–READ CAREFULLY: THIS END USER LICENSE AGREEMENT ("EULA") IS A LEGAL AGREEMENT BETWEEN YOU (EITHER AN INDIVIDUAL OR A SINGLE ENTITY) AND SYNOLOGY, INC. AND ITS AFFILIATES, INCLUDING SYNOLOGY AMERICAN CORP AND SYNOLOGY UK LTD., (COLLECTIVELY, "SYNOLOGY") FOR ANY SYNOLOGY SOFTWARE, TOGETHER WITH ANY OTHER ASSOCIATED FIRMWARE, MEDIA, PRINTED MATERIALS AND "ONLINE" OR ELECTRONIC DOCUMENTATION (COLLECTIVELY, THE "SOFTWARE") AVAILABLE FOR DOWNLOAD AT WWW.
INABILITY TO USE THE SOFTWARE OR OTHERWISE UNDER OR IN CONNECTION WITH THIS EULA OR THE SOFTWARE, WHETHER BASED ON CONTRACT, TORT (INCLUDING NEGLIGENCE), STRICT LIABILITY OR OTHER THEORY EVEN IF SYNOLOGY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Section 13. Limitation of Liability.
SYNOLOGY, INC. LIMITED PRODUCT WARRANTY THIS LIMITED WARRANTY ("WARRANTY") APPLIES TO THE PRODUCTS (AS DEFINED BELOW) OF SYNOLOGY, INC. AND ITS AFFILIATES, INCLUDING SYNOLOGY AMERICA CORP AND SYNOLOGY UK LTD., (COLLECTIVELY, "SYNOLOGY"). YOU ACCEPT AND AGREE TO BE BOUND BY THE TERMS OF THIS WARRANTY BY OPENING THE PACKAGE CONTAINING AND/OR USING THE PRODUCT. IF YOU DO NOT AGREE TO THE TERMS OF THIS WARRANTY, DO NOT USE THE PRODUCT.
the expiration of the applicable Warranty Period, support for Products may be available from Synology upon written request. 2.7 Exclusions.
single arbitrator, and will be limited solely to the dispute between Customer and Synology. The arbitration, or any portion of it, will not be consolidated with any other arbitration and will not be conducted on a class-wide or class action basis. The arbitration shall be held in King County, Washington, U.S.A. by submission of documents, by telephone, online or in person as determined by the arbitrator at the request of the parties.
